/
Connecting a Zixi-Enabled Device (Encoder UI)
Connecting a Zixi-Enabled Device (Encoder UI)
israel drori (Unlicensed)
Eli Pielet (Writec) (Unlicensed)
Owned by israel drori (Unlicensed)
If you have added a source from a Zixi-enabled device, you will need to configure it on the encoder in order to connect it to ZEN Master. The UI structure varies for different Zixi-enabled encoders, however the following settings should be configured to connect to ZEN Master.
To connect a Zixi-enabled encoder:
- In ZEN Master, in the main navigation, click Sources.
- Select the relevant source from the list of Sources.
- In the Details pane at the bottom of the screen, click the Manual Configuration tab.
This tab contains specific configuration settings for the selected Source. Use the values shown for the following parameters to configure the Zixi Enabled encoder:
Parameter | Description |
---|---|
Host | The IP address/URL of the ZEN Master host. |
Port | The port that has been configured in ZEN Master. |
Stream ID | The stream name. |
Password | The access password that has been configured in ZEN Master. |
Related content
Adding a Zixi Source – Broadcaster
Adding a Zixi Source – Broadcaster
Read with this
Source Configuration
Source Configuration
More like this
Adding a Zixi Source – ZEC
Adding a Zixi Source – ZEC
Read with this
Adding a Zixi Source – Other-Enabled Device
Adding a Zixi Source – Other-Enabled Device
More like this
Connecting an Unmanaged Pull Target
Connecting an Unmanaged Pull Target
More like this
Adding a Source
Adding a Source
More like this