Network Settings in Receiver

Owned by Copy Space for Confluence
21 Jun 2017
1 min read

 

The Network Settings screen includes configuration parameters for the network interfaces in the physical server. There are slight differences in the settings between Linux and Window systems.

 

FieldDescription

-eth0/-eth1/-eth2/

-eth3

NIC interface configurations. To configure the interface, click the Interface name to open additional settings.

Custom link setting

 

Addresses

Displays the IP, mask, gateway addresses and if DHCP and VLAN is operative.

DNS servers

 

Use DHCP DNS servers

Select this checkbox to enable DHCP. You can also configure the IP addresses manually.

DNS1

Specifies the address of the DNS1 server. Available only if the Use DHCP DNS server option is not selected.

DNS2

Specifies the address of the secondary DNS2 server. Available only if the Use DHCP DNS server option is not selected.

 

To Display the Network Statistics:

  1. From the Settings page of the Zixi Receiver, click Network on the left-hand side.
    The various Network settings are displayed.

  2. Click   on the right-hand side. The UDP statistics window is displayed.

    FieldDescription

    ####Packets received

    Number of packets on network received.

    ####packets to unknown port received

    Number of packets to unknown port on network received.

    ####packet receive errors

    Number of packets on network which received errors.

    ####packets sent

    Number of packets on network sent.

    ####SndbufErrors

    Number of Sent buffer errors.

     

  3. Refresh button will update the data, while Close will close the window.

 

 

 

 

 

Â