The Network Settings screen includes configuration parameters for the network interfaces in the physical server. There are slight differences in the settings between Linux and Window systems.

Field	Description
-eth0/-eth1/-eth2/ -eth3	NIC interface configurations. To configure the interface, click the Interface name to open additional settings.
Custom link setting
Addresses	Displays the IP, mask, gateway addresses and if DHCP and VLAN is operative.
DNS servers
Use DHCP DNS servers	Select this checkbox to enable DHCP. You can also configure the IP addresses manually.
DNS1	Specifies the address of the DNS1 server. Available only if the Use DHCP DNS server option is not selected.
DNS2	Specifies the address of the secondary DNS2 server. Available only if the Use DHCP DNS server option is not selected.

To Display the Network Statistics:

From the Settings page of the Zixi Receiver, click Network on the left-hand side.
The various Network settings are displayed.

Click on the right-hand side. The UDP statistics window is displayed.

Field	Description
####Packets received	Number of packets on network received.
####packets to unknown port received	Number of packets to unknown port on network received.
####packet receive errors	Number of packets on network which received errors.
####packets sent	Number of packets on network sent.
####SndbufErrors	Number of Sent buffer errors.

Refresh button will update the data, while Close will close the window.

Browser not supported