Manual Method

To add a Push Input to the Broadcaster:

1. In Zixi Broadcaster, go to Inputs.

2. On the Inputs screen, click the + New Input button.
   The Add a new input stream window is displayed.
   
   

   Open

   

3. In the Stream ID field, enter a name that you will use to identify the stream sent from your OnAir app. (Make a note of the precise Stream ID (case sensitive). You will enter this as the Channel ID in the OnAir settings.)

4. In the stream type selection, select the Push radio button (default).

5. In the Stream Parameters section, if you would like to add a password in order to increase security, enter a password in the Password field. (Make a note of the precise Password (case sensitive). You will enter this as the Password in the OnAir settings.)

6. Configure additional settings as necessary.

7. Click OK.
   The “Input added” message appears on the top of the screen.

The new Input is added to the Zixi Broadcaster and now appears in the list of streams available on the Inputs screen. The Status should be Offline (blue).

Open

To add an RTMP Input to the Broadcaster:

1. In Zixi Broadcaster, go to Inputs.

2. On the Inputs screen, click the + New Input button.
   The Add a new input stream window is displayed.

3. In the Stream ID field, enter a name that you will use to identify the stream sent from your OnAir app. (Make a note of the precise Stream ID (case sensitive). You will enter this as the Channel ID in the OnAir settings.)

4. In the stream type selection, select the RTMP radio button.

5. In the Type field, select Push.

6. Configure additional settings as necessary.

7. Click OK.
   The new Input is added to the Zixi Broadcaster and now appears in the list of streams available on the Inputs screen. The Status should be Offline (blue).