Step 4 - Wirecast Configuration

Once the ZEC is installed and Wirecast is configured, the Wirecast encoder can send the encoded stream to ZEC via RTMP. 

To configure RTMP output on Wirecast:

1. In Wirecast, go to Output > Output Settings.

2. Click Add.

3. Under Select an Output Destination choose RTMP Server and in the Destination field, click More.
   
   

   Open

   

4. In the Address field, enter the IP address of the ZEC in the format displayed above.

5. Configure other properties in the dialog as needed.

Wirecast is now ready to send an RTMP stream locally to ZEC.