Adding a Zixi Pull Target

To add a new Zixi Pull Target:

1. In the main navigation, click Targets.
2. Click + Add.
   The Create New Target window is displayed.
   
3. Click on Pull.
   The Create New Zixi Target configuration window is displayed.
   
4. In the Info section, in the Name field, enter a logical name for the Pull Target.
5. In the Access Tags field, for the current use case select Default from the drop-down list. To learn more about using Access Tags to control access to resources see Configuring Tags in Zen Master User Guide.
6. In the Type section, verify that Pull is selected (default).
7. Under Channel Type, verify that ZEN Master Channel is selected (default).

8. In the Channel field, select from the drop-down list the Channel that will be sent to the Target. (optional field)

   The Target will only become functional once a Channel has been assigned to it. However, you can configure the Target settings and then add a Channel to the Target after the initial configuration.

9. In the Device section, select the device type of the Pull Target. For the current use case, you will be using the Receiver device type.

10. In the Receiver field, select from the drop-down list a Receiver that is managed by ZEN Master.

11. Fill in optional fields as desired, see Adding Zixi Pull Targets in ZEN Master User Guide.
12. Click Save.