Page Comparison

ZEN Master enables you to 'push' a Channel to an Zixi Broadcaster. You can configure redundant hosts to ensure consistency. To learn more about redundancy in ZEN Master see Redundancy in ZEN Master.

The following procedure describes how to add a Zixi Push Target in ZEN Master. In addition, an explanation of each of the configuration parameters is given in the table below.

To add a new Push Target:

1. In the main navigation, click Targets.
2. Click + Add.
   The Create New Target window is displayed.
   
3. Click on Zixi.
   The Create New Zixi Target configuration window is displayed.
   Image Removed
   Image Added
   
   
4. In the Info section, in the Name field, enter a logical name for the Push Target.
5. In the Tags field, select one or more of the predefined Tags from the drop-down list.
   Tags are used for access control. By selecting a Tag you are relating this target to that Tag. Tags are associated with certain roles (through the Users & Roles screen), and roles, in turn, are associated with users and user groups. If you would like to create a new Tag, see Creating a Tag.

6. In the Events Configuration Profile field, select from the dropdown list the profile that you would like to apply to this Target. By default, the Default profile is applied.

   Info
   Events Profiles consist of a series of rules that determine precisely how various types of Events are logged and what results they trigger.

   
   

7. The Target's location is used to represent it in the proper position in the Map display (see Maps). By default, the location is determined automatically based on the Target's IP. If you would like to manually set the location of the Target (Optional), use the following procedure:
   1. Click on the Edit icon next to the Location field.
      A search box is shown below the Location field.
   2. Enter identifying info for the location (e.g. street address, zip code, coordinates).
      Search results are displayed below the search box as you type.
   3. Click on the desired location.
      The selected location populates the Location field.
8. In the Type section, select Push.
   The fields relevant for Push Targets are shown.
9. In the Channel Type section, verify that the ZEN Master Channel is selected (default).

10. In the Channel field, select from the drop-down list the Channel that will be sent to the Target. (Optional field)

    Info
    The Target will only become functional once a Channel has been assigned to it. However, you can configure the Target settings and then add a Channel to the Target after the initial configuration.

    
    

11. In the Source Preference field, select one of the following options:
    • Any Source – the Target will establish a connection to any available source in the Channel. Upon any disconnects with the current source, the Target will reconnect to another available source in the Channel.
    • Primary Sources Only – the Target will establish and maintain connection to a source designated as Primary in the Channel. Upon loss of connection to that source, the Target will establish a connection to another available Primary source in the Channel.
    • Backup Sources Only – the Target will establish and maintain connection to a source designated as Backup in the Channel. Upon loss of connection to that source, the Target will establish connection to another available Backup source in the Channel.

    • Specific Source – the Target will only establish a connection to the source specified by the user and will not try to connect to any other source in the Channel.
      
      

      Info
      It is not possible to select "Prefer Primary Sources" or "Prefer Backup Sources". This means you cannot have a Target failover from a Primary to a Backup source in the Channel unless "Any Source" is selected.

      
      

12. In the Target Host field, enter the hostname of the primary Broadcaster.
13. Under Redundancy, select one of the following:
    1. Alt. Host - in case of error, the stream will failover to the alternative host, defined in the Alt. Target Host field. 
    2. Bonding - uses all the NICs available on the Broadcaster in parallel. 
14. In the Alt. Target Host field, enter the hostname of a backup Broadcaster. (Optional field)

15. If you are using DTLS on the server side but don't have access to the certificate, then select the Ignore DTLS Certificate checkbox.

    Info
    Even when this option is selected, the stream is still transmitted in the encrypted format, you are only losing the ability to verify the identity of the source.

    
    

16. In the Stream ID field, enter the stream ID as defined in the Broadcaster.
17. In the Password field, enter a password for accessing the stream. (Optional field)
18. In the Latency [ms] field, enter the latency in milliseconds.
19. If you would like to apply a PID Mapping profile to this Target, then in the PID Mapping Profile field, select the desired profile from the dropdown list. For more information, see PID Mapping Profiles.
20. In the Encryption section, if you would like to encrypt the stream, select one of the encryption methods. Options are: Disabled (default), AES 128, AES 192 or AES 256.
21. If one of the Encryption methods was selected, in the Encryption Key field, enter an encryption key that will be used to encrypt the connection OR click Random to generate a random encryption key.
22. In the Initial State section, select the Disabled checkbox if you would like to disable this Target upon initial configuration.

23. Select the Muted checkbox if you would like to disable error/recovery notifications for this Target upon initial configuration.

    Info
    You can Enable/Unmute the Target at any time.

    
    

24. If you would like to configure the maximum transmission unit (largest data packet that a network-connected device will accept) for the pulling of the stream, click on Advanced and enter the maximum transmission unit in bytes in the MTU field.
    Image RemovedImage Added
25. Click Save.

Zixi Push Target Configuration Parameters Table