Adding RTMP Streams

This enables you to create a Push or Pull RTMP input stream.

To Add a RTMP Stream:

In the Zixi Broadcaster Navigation menu, click the Inputs tab.
In the Menu bar, click New Input. The Add a new input stream window is displayed.
Enter the unique Stream I.D.

Note this must be identical (case sensitive) to the stream name configured in the Zixi Feeder.
Select the maximum concurrent connections to this stream from the Max. Outputs drop-down list. Default: Unlimited.
Select the Show in Matrix check box to display this stream in the Matrix (see Using the Matrix). Default: Selected.
Select RTMP for the input stream.
Specify the Stream Parameters (see Input Stream Parameters Table).
If you want to Enable time shift, select this checkbox (see Input Stream Parameters Table).
If you want to Transmit as multicast, select this checkbox (see Input Stream Parameters Table).
If you want to Enable encryption , select this checkbox (see Input Stream Parameters Table).
If you want to configure the Recording Parameters, specify them in the respective fields (see Input Stream Parameters Table).
Click OK. The “Input added” message appears on the top of the screen. The RTMP Stream is added to the Zixi Broadcaster and now appears in the list of streams available in the Zixi Broadcaster inputs UI.

Input Stream Parameters Table

Parameter	Description
Stream Parameters
Type	Select the desired type for the RTMP stream: Push – the stream is pushed to the Zixi Broadcaster (not initiated by the Zixi Broadcaster). No additional connection parameters need to be filled. Pull – Zixi Broadcaster will initiate the stream by accessing it through the following parameters:
URL	Type the Stream URL from which the Zixi Broadcaster will access. In Pull mode you can define RTMPS clients with the proven security of a secure socket layer (SSL), by using the rtmps:// url
Stream Name	Type the unique name for the stream that has been defined in the RTMP server.
User Name	Specify the User name to authenticate on the remote RTMP server
Password	Specify the string that is used for authorization on the remote RTMP server.
Disconnect if inactive	Disconnects if inactive.
Enable time shift	Select this checkbox to record the stream content and broadcast it after the specified delay.
Maximum delay [hh:mm:ss] (for Time Shift enabled)	Specify the maximum time delay of this input.
Transmit as multicast	Select this checkbox to enable the transmission of this stream’s outputs as multicast. A Zixi receiver that will pull the stream will receive it in multicast. By default Zixi Broadcaster is configured to allow transparent fallback to unicast if it is out of the LAN. Requires enabling Multicast Pull in the Settings.
Multicast Only (for Multicast enabled)	Select the check box to force only Multicast outputs.
Enable encryption	Select this checkbox to encrypt the Input stream. For more information, see Encrypting an Input Stream in Zixi Broadcaster.
Encryption type (for Encryption enabled)	Specify the type of Encryption (AES 128/192/256).
Encryption key (for Encryption enabled)	Click Generate to generate an encryption key. The generated encryption key must be sent to the end-user to decipher the received encoded stream.
Recording Parameters
Max recorded file duration [hours]	Specifies the maximum time allotted for recording a video stream. Default: 2 hours
Keep recorded files for [hours]	Specifies the maximum time for storing the recording.
Custom Path	Optionally specify a storage location for the recorded files that is relative to the root folder. This location bypasses the location specified as the root folder in the Settings > General screen.
File Name Template	Specify the file name pattern that Zixi will use to generate when saving the recorded content. A separate file will be generated for each recording up to the time specified in the Max recorded file duration parameter (see above). After this duration a new file will be generated. The file name pattern can include any string and up to five variables listed below. Only the %T=HH.MM.SS creation time is mandatory. You can change the order of these variables and add text as long as you maintain the legitimate structure of the file in Linux and Windows: %S=stream id - optional. %Y=year - optional %M=month - optional %D=day - optional %T=HH.MM.SS creation time - mandatory For example, the following pattern %Y_recording%T.ts will generate the following file name 2017_recording15:32:35.ts.