Feeder Output with Network Bonding

To Add Network Bonding to a Feeder Output:

1. In the Outputs page of Zixi Feeder, click + New Output in the menu bar.
   The New Output window is displayed:
   
   

   Open

   

2. Enter the unique Name that you want to configure on the Feeder.

3. Select Push to Broadcaster as the Type of output.

4. In the Properties section, enter the parameters as described in the Creating a Push to Broadcaster Output procedure. 

5. Click the Bonded Link checkbox.
   The bonded link section is displayed:
    

   Open

   

6. In the boded link section, click the + button.  
   A new row of destination fields is displayed:
   
   

7. In the IP field, do one of the following:

   • If you want to set a specific IP address select the IP address of the Zixi Feeder that you want to use

   • If you want to use all available IPs, select ALL.

8. In the Bitrate Limit field, do one of the following:

   • If you want to limit the bitrate that will be used in this link, enter the limit value in Kbps.

   • If you DO NOT want to limit the bitrate, leave the default value - Unlimited.

9. In the Backup field, do one of the following:

   • If you want to use this link only if there is not enough bandwidth in the other links, select the Backup.

   • If you want to use this link in parallel to other links, DO NOT select the Backup.

10. Click OK.

11. Repeat the steps above to add additional links.