Adding Delayed Streams

You can delay the broadcasting of an input stream by enabling “time shifting”. In this case the input stream will be stored on the local disk, while a variant of the input is created and delayed according to the specified duration. 

To Add a Delayed Stream:

1. In the Zixi Broadcaster Navigation menu, click the Inputs tab.
2. In the Menu bar, click New Input. The Add a new input stream window is displayed.

3. Enter the unique Stream I.D.

4. Select the maximum concurrent connections to this stream from the Max. Outputs drop-down list. Default: Unlimited.
5. Select the Show in Matrix check box to display this stream in the Matrix (see Using the Matrix). Default: Selected.
6. Select Delayed for the input stream.
   
7. Specify the Stream Parameters (see Input Stream Parameters Table).
8. If you want to Enable time shift, select this checkbox (see Input Stream Parameters Table).
9. If you want to Transmit as multicast, select this checkbox (see Input Stream Parameters Table).
10. Click OK.

11. The “Input added” message appears on the top of the screen. The Delayed Stream is added to the Zixi Broadcaster and now appears in the list of streams available in the  Zixi Broadcaster inputs UI.

    Input Stream Parameters Table

    Parameter	Description
    Stream parameters
    Source	Select one of the input streams that were configured to enable "time shift".
    Delay	Specify the delay period relative to the original stream.
    Transmit as multicast	Select this checkbox to enable the transmission of this stream’s outputs as multicast. A Zixi receiver that will pull the stream will receive it in multicast. By default Zixi Broadcaster is configured to allow transparent fallback to unicast if it is out of the LAN. Requires enabling Multicast Pull in the Settings.
    Multicast-Only (for multicast enabled)	If desired, specify multicast only outputs.