To Add UDP Output:
- On the Inputs page of ZiXi Feeder, click the desired row of the incoming stream to which you want to add new output.
- Click
button on the right end of the selected row and click New Output.
The New output window with the settings of the selected input stream is displayed. You can modify any of these settings.
- Enter the unique Name that you want to configure on the Feeder.
- Select UDP Output as the Type of output.
- Enter the Input parameters (see table below for additional parameters).
- Designate the Properties’ Path.
- Click OK. The New Output with its new settings takes effect.
| Parameter | Description |
|---|---|
| Name | Specifies the unique name of the stream. |
Type | Specifies what kind of activity is being performed on the stream. |
| Input | |
Input Name | Specify the unique Stream ID that the remote receiver expects. Must be identical to the one on the Broadcaster. |
Program | If you have created a filter, you can select the relevant program |
Filter | If you have created a filter, you can select the relevant filter |
| Properties | |
Host | Specifies the IP address of the stream destination. |
Port | Specifies the ports to listen on for the output streams. |
Smoothing | Enables transmission of the output at the correct rate. Required when the receiving device is sensitive and can’t lock on to the stream (in such a case, the recommended latency is 100 - 1000 ms). |
NIC | Specifies the Network card used. |
TTL | Specifies the network Time-to-Live parameter |