To Add UDP Output:
- On the Inputs page of ZiXi Feeder, click the desired row of the incoming stream to which you want to add new output.
- Click
button on the right end of the selected row and click New Output.
The New output window with the settings of the selected input stream is displayed. You can modify any of these settings.
- Enter the unique Name that you want to configure on the Feeder.
- Select UDP Output as the Type of output.
- Enter the Input parameters (see table below for additional parameters).
- If your deployment includes a DNS Load Balancer, it is possible to group multiple outputs into a single Output Group. All the outputs created in Zixi Feeder within the same group and with the same host name, will be resolved into the same IP address. You can Create a New Output Group or Use an Existing Output Group.
- In the Host field, specify the IP address of the stream destination.
- In the Port field, specify the port of the destination.
- In the NIC field, select the network card from which the stream will be transmitted.
- Click OK.
The new UDP Output with its settings is created and now appears on the Outputs screen.
| Parameter | Description |
|---|---|
| Name | Specifies the unique name of the stream. |
Type | Specifies what kind of activity is being performed on the stream. |
| Input | |
Input Name | Specify the unique Stream ID that the remote receiver expects. Must be identical to the one on the Broadcaster. |
Program | If you have created a filter, you can select the relevant program |
Filter | If you have created a filter, you can select the relevant filter |
| Properties | |
| Group | If your deployment includes a DNS Load Balancer, it is possible to group multiple outputs into a single Output Group. SeeOutput Groups for more details. |
Host | Specifies the IP address of the stream destination. |
Port | Specifies the ports to listen on for the output streams. |
Smoothing | Enables transmission of the output at the correct rate. Required when the receiving device is sensitive and can’t lock on to the stream (in such a case, the recommended latency is 100 - 1000 ms). |
NIC | Specifies the Network card used. |
TTL | Specifies the network Time-to-Live parameter |