To Create a Pull Output:
- In the ZiXi Broadcaster Outputs page, click
. The New Output window is displayed.
- Type in the unique identifier for this output in the Output Name.
- Select an Input Stream to be made available on this output from the adjacent drop-down list.
- Select the Show in Matrix check box to display this stream in the Matrix (see Using the Matrix). Default: Selected.
- Select Pull.
- Enter the Output Parameters (see Output Stream Parameters Table).
- Click OK.
The new Pull Output with its settings is created and now appears on the screen.
Output Stream Parameters Table
| Parameter | Description |
|---|---|
| Output Parameters | |
Stream ID | Specify the unique Stream ID that the remote receiver expects (recommended – identical to ‘Input Stream’). |
Remote ID | Specifies the Receiver ID that allowed to pull that stream. |
Password | Specifies a string that can be used to authenticate that the ZiXi Receiver is authorized to pull this stream (Optional). |
Latency [ms] | Specify the buffer size that ZiXi Broadcaster is keeping for error correction. For example, 6000 milliseconds would ensure that the stream is protected for six seconds of errors in the network. Default: Remote configuration. Remote configuration – use the latency configured in the Receiver. Otherwise use a value to override the value configured in the Receiver. |