This enables the Receiver to receive a UDP/RTP/RTP + SMPTE 2022 FEC streams.
To Add a UDP Stream:
- Click the Inputs tab at the top of the Zixi Receiver screen.
- Click New Input on the upper right hand side of the screen.
The Stream details window is displayed:
- Select UDP for the Input stream.
- Enter the unique Input Name (an internal name) for the Receiver.
- Enter the Stream Parameters (see table below for additional parameters).
- Click OK. The “Input added” message appears on the top of the screen. The Pull Stream is added to the Zixi Receiver and now appears in the list of Input streams available.
| Parameter | Description |
|---|---|
Input Name | Specifies the internal name for the input stream. |
Multicast IP | Specifies the multicast address when the input stream is transmitted over multicast. |
Port | Specifies the port to listen on. This port must be open on the Zixi Receiver. |
Local Interface | Specifies the local IP address. |