This enables the Receiver to receive a UDP/RTP/RTP + SMPTE 2022 FEC streams.

To Add UDP Streams:

In the ZiXi Receiver Navigation menu, click the Inputs tab.
In the Menu bar, click New Input. The Stream details screen is displayed.
Select UDP for the Input stream.
Enter the unique Input Name (an internal name) for the Receiver.
Enter the Stream Parameters (see table below for additional parameters).
Click OK.
The “Input added” message appears on the top of the screen. The Pull Stream is added to the Zixi Receiver and now appears in the list of Input streams available.

Parameter	Description
Input Name	Specifies the internal name for the input stream.
Multicast IP	Specifies the multicast address when the input stream is transmitted over multicast.
Port	Specifies the port to listen on. This port must be open on the Zixi Receiver.
Local Interface	Specifies the local IP address.

Browser not supported