The UDP output outputs the stream in UDP or RTP format over unicast or multicast.
...
| Parameter | Description | ||
|---|---|---|---|
Name | Specify the unique name of the stream. | ||
Type | Specify what kind of activity is being performed on the streamthe output type. Select UDP Output. | ||
| Input | |||
Input Name | Select the Input which has been previously configured as Input in the Feeder. | ||
Program | If you have created a filter, you can select the relevant program. | Filter | If you have created a filter, you can select the relevant filterthe stream is a Multi Program Transport Stream and you want to stream a specific program, select the relevant Program from the drop-down list. Select Original to stream all the programs in the stream. |
Filter | Within the selected program, you can stream specific PIDs by creating a Filter (see: Adding Filters to Input Stream (PID Filtering) section) and then selecting it from the Filter drop-down list. Select Original to stream all PIDs within the program. | ||
| Properties | |||
| Group | If your deployment includes a DNS Load Balancer, it is possible to group multiple outputs into a single Output Group. All the outputs created in Zixi Feeder within the same group and with the same host name, will be resolved into the same IP address. You can create a new output group or use an existing group. See Output Groups for more details. | ||
Host | Specify the IP address of the stream destination. | ||
Port | Specify the port of the stream destination. | ||
Smoothing | Enables transmission of the output at the correct rate. Required when the receiving device is sensitive and can’t lock on to the stream (in such a case, the recommended latency is 100 - 1000 ms). | ||
NIC | Specify the Network card used. | ||
TTL | Specify the network Time-to-Live parameter |
...