Page Comparison

To Add UDP Output:

On In the Zixi Feeder Inputs page of ZiXi Feeder, click the desired row of Actions Image Added button for the incoming stream to for which you want to add new configure an output.
Click Image Removed button on the right end of the selected row and In the drop-down menu, click New Output.
The New output window with the settings of the selected input stream is displayed. You can modify any of these settings.
Enter the unique Name that you want to configure on the Feeder.
Select UDP Output as the Type of output.
Enter the Input parameters (see table Output Parameters Table below for additional parameters).
If your deployment includes a DNS Load Balancer, it is possible to group multiple outputs into a single Output Group. All the outputs created in Zixi Feeder within the same group and with the same host name, will be resolved into the same IP address. You can Create a New Output Group or Use an Existing Output Groupcan create a new output group or use an existing output group. See Output Groups.
In the Host field, specify the IP address of the stream destination.
In the Port field, specify the port of the destination.
In the NIC field, select the network card from which the stream will be transmitted.
Click OK.
The new UDP Output with its settings is created and now appears on the Outputs screen.

Output Parameters Table

Parameter	Description
Name	Specifies Specify the unique name of the stream.
Type	Specifies Specify what kind of activity is being performed on the stream.
Input
Input Name	Specify the unique Stream ID that the remote receiver expects. Must be identical to the one on the Broadcaster. Note: The drop-down list consists of all those previously configured inputs on the FeederSelect the Input which has been previously configured as Input in the Feeder.
Program	If you have created a filter, you can select the relevant program.
Filter	If you have created a filter, you can select the relevant filter.
Properties
Group	If your deployment includes a DNS Load Balancer, it is possible to group multiple outputs into a single Output Group. SeeSee Output Groups for more details.
Host	Specifies Specify the IP address of the stream destination.
Port	Specifies Specify the ports to listen on for the output streams.
Smoothing	Enables transmission of the output at the correct rate. Required when the receiving device is sensitive and can’t lock on to the stream (in such a case, the recommended latency is 100 - 1000 ms).
NIC	Specifies Specify the Network card used.
TTL	Specifies Specify the network Time-to-Live parameter.