...
This enables the Receiver to receive a UDP/RTP/RTP + SMPTE 2022 FEC streams.
To Add a UDP StreamsStream:
- In the ZiXi Zixi Receiver Navigation menu, click the Inputs tab.In Inputs page, click the + New Input button in the Menu bar, click New Input. The .
The Stream details screen is displayed.
- Select UDP for the Input stream.
- Enter the unique Input Name (an internal name) for the Receiver.
- Enter the Stream Parameters (see table below for additional parametersInput Stream Parameters Table below).
- Click OK.
The “Input added” message appears on the top of the screen. The Pull Stream is added to the Zixi Receiver and now appears in the list of Input streams available.
Input Stream Parameters Table
Parameter | Description |
|---|---|
Input Name | Specifies Specify the internal name for the input stream. |
Multicast IP | Specifies Specify the multicast address when the input stream is transmitted over multicast. |
Port | Specifies Specify the port to listen on. This port must be open on theon the Zixi Receiver. |
Local Interface | Specifies Specify the local IP address. Or select Any to enable connecting through any available IP address. |