Versions Compared

Old Version 1

changes.mady.by.user Copy Space for Confluence

Saved on

compared with

New Version Current

changes.mady.by.user israel drori (Unlicensed)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


 

To Add UDP Output:

  1. On the Inputs page of ZiXi Feeder, click the desired row of the incoming stream to which you want to add new output.
  2. Click  button on the right end of the selected row and click New Output.
    The New output window with the settings of the selected input stream is displayed. You can modify any of these settings.
    Image RemovedImage Added
  3. Enter the unique Name that you want to configure on the Feeder.
  4. Select UDP Output as the Type of output.
  5. Enter the Input parameters (see table below for additional parameters).
  6. Designate the Properties’ Path.
  7. Click OK. The New Output with its new settings takes effect.
  8. If your deployment includes a DNS Load Balancer, it is possible to group multiple outputs into a single Output Group. All the outputs created in Zixi Feeder within the same group and with the same host name, will be resolved into the same IP address. You can Create a New Output Group or Use an Existing Output Group.
  9. In the Host field, specify the IP address of the stream destination.
  10. In the Port field, specify the port of the destination.
  11. In the NIC field, select the network card from which the stream will be transmitted.
  12. Click OK. 
    The new UDP Output with its settings is created and now appears on the Outputs screen.
ParameterDescription
NameSpecifies the unique name of the stream.

Type

Specifies what kind of activity is being performed on the stream.

Input
 

Input Name

Specify the unique Stream ID that the remote receiver expects. Must be identical to the one on the Broadcaster.

Note: The drop-down list consists of all those previously configured inputs on the Feeder

Program

If you have created a filter, you can select the relevant program

Filter

If you have created a filter, you can select the relevant filter

Properties
 

GroupIf your deployment includes a DNS Load Balancer, it is possible to group multiple outputs into a single Output Group. SeeOutput Groups for more details.

Host

Specifies the IP address of the stream destination.

Port

Specifies the ports to listen on for the output streams.

Smoothing

Enables transmission of the output at the correct rate. Required when the receiving device is sensitive and can’t lock on to the stream (in such a case, the recommended latency is 100 - 1000 ms).

NIC

Specifies the Network card used.

TTL

Specifies the network Time-to-Live parameter

 

 

 

...