Transcoding an Input Stream

Owned by Copy Space for Confluence
Last updated: 30 Jan 2020 by Alon Men
5 min read

Zixi Broadcaster offers live transcoding, enabling users to create multiple bitrate streams from a single input stream.

Supported Video and Audio formats include:

  • Video Decoding – MPEG2, H.264/AVC , H.265/HEVC
  • Video Encoding – MPEG2, H.264/AVC , H.265/HEVC

  • Audio Decoding – AAC, MPEG-1 Audio Layer I / II / III, MPEG-2 Audio Layer I / II / III, AC-3 (Dolby Digital)

    For AC-3, which can contain up to six discrete channels of sound, the transcoder only supports the left and right channels and will ignore the other channels.

  • Audio Encoding – AAC, AAC-HE (High Efficiency) and AAC-HEv2; Pass through (no encoding) – any audio codec (MPEG1/2 / AAC / AC-3, E-AC-3 (Dolby Digital Plus).

The transcoder comes with pre-set common video profiles:
1080i60 / 1080i59.94, 1080p30 / 1080p25, 720p60, 720p50 / 720p30, 576i60 / 576p25, 480i60 / 480p29.97

In order to transcode an input stream from the Inputs screen you must first configure the transcoding profiles in the Transcoder screen. For more information, see Broadcaster Transcoder section. 

To Transcode an Input Stream:

  1. In the Zixi Broadcaster Inputs page, click the desired input stream that you want to transcode.
  2. Click the  button on the right end of the selected row and then Transcode. The Transcode <input stream name> window with the settings of the selected input stream is displayed. 
  3. Enter the unique Stream I.D. for the new transcoded input stream.
  4. Under Stream Parameters, in the Video profile and Audio profile fields, do one of the following:
    • Select the desired Video Profile and/or Audio Profile that you have configured.
    • Select Keep original stream - if you have not configured a video or audio profile or do not want it transcoded or you want to set specific transcoding parameters for the specific stream. In this case, the video or audio input will not be transcoded.
    • Select Remove stream – you can use the transcoder to remove the video or audio track from the stream. 
  5. Fill in additional fields (see table below for additional parameters).
  6. Click OK.
    The transcoded input stream is created and appears in an embedded window labeled Transcoded sources under the original input stream from which it was created.
  1. Parameter
    Description
    Advanced Options

    Video Profile

    Select an existing profile, select Keep original stream if you do not wish to transcode the video stream, or select Remove stream if you want to remove the video track.

    Audio Profile

    Select an existing profile, select Keep original stream if you do not wish to transcode the audio stream, or select Remove stream if you want to remove the audio track.

    Transport Stream Bitrate (Kbps)

    Specify the bitrate of the transport stream. This parameter is optional. If you do not specify a TS Bitrate, the stream will be VBR. If you specify a bitrate, the stream will be CBR.

    Use Hardware Acceleration (if available)Select this checkbox to use hardware acceleration component (e.g. NVIDIA or Intel) if it has been installed.

    Pass all PIDs

    Select this checkbox to pass-through all non-transcoded PIDs.

    Smoothing Buffer (ms)

    Specify how much of the transcoded stream (in milliseconds) to store before transmitting it back to the server in order to prevent bursts.

    If the Transport stream bitrate [kbps] field is empty, the smoothing buffer is disabled.

    If the Transport stream bitrate [kbps] field is NOT empty, it is recommended to enter around 200ms, which should be enough to prevent bursts.
    Enable time shift
    Maximum delay [hh:mm:ss]Specify the time of the delayed transmission of this stream. Maximum: 24 hours.
    Transmit as multicast

    Selecting this checkbox enables the transmission of this stream’s outputs as multicast. A Zixi receiver that will pull the stream will receive it in multicast. By default Zixi Broadcaster is configured to allow transparent fallback to unicast if it is out of the LAN. Requires enabling Multicast Pull in the Settings. This setting requires enabling Multicast Pool (Settings > Multicast Pool).

    Multicast OnlySelecting this checkbox will force the transmission of this stream only in multicast.
    Enable EncryptionSelect this checkbox to encrypt the Input stream. For more information, see Encrypting an Input Stream in Zixi Broadcaster
    Encryption type (for Encryption enabled)Specify the type of Encryption (AES 128/192/256).
    Encryption key (for encryption enabled)Click Generate to generate an encryption key. The generated encryption key must be sent to the end-user to decipher the received encoded stream.

    Recording parameters

    Select this checkbox to customize the recording parameters.

    Destination Type

    Select the radio button for the desired storage type and then fill in the relevant parameters.

    ·         Record to disk – the recording is saved on the local disk.

    ·         Record to S3 – the file is saved to your AWS S3 Bucket.

    Record to Disk Parameters

    File Name Template

    Specify the file name pattern that Zixi will use to generate when saving the recorded content. A separate file will be generated for each recording up to the time specified in the Max recorded file duration parameter (see above). After this duration a new file will be generated.

    The file name pattern can include any string and up to five variables listed below. Only the %T=HH.MM.SS creation time is mandatory. You can change the order of these variables and add text as long as you maintain the legitimate structure of the file in Linux and Windows:

    ·         %S=stream id - optional.

    ·         %Y=year - optional

    ·         %M=month - optional

    ·         %D=day - optional

    ·         %T=HH.MM.SS creation time - mandatory

    For example, the following pattern %Y_recording%T.ts will generate the following file name 2017_recording15:32:35.ts.

    Max recorded file duration [hours]

    Specify the maximum time allotted for recording a video stream. Default: 2 hours

    Keep recorded files for [hours]

    Specify the maximum time for storing the recording. Default: 0 hours

    Custom Path

    Optionally specify a storage location for the recorded files that is relative to the root folder. This location bypasses the location specified as the root folder in the Settings > General screen.

    Record to S3 Parameters

    File Name Template

    Specify the file name pattern that Zixi will use to generate when saving the recorded content. A separate file will be generated for each recording up to the time specified in the Max recorded file duration parameter (see above). After this duration a new file will be generated.

    The file name pattern can include any string and up to five variables listed below. Only the %T=HH.MM.SS creation time is mandatory. You can change the order of these variables and add text as long as you maintain the legitimate structure of the file in Linux and Windows:

    ·         %S=stream id - optional.

    ·         %Y=year - optional

    ·         %M=month - optional

    ·         %D=day - optional

    ·         %T=HH.MM.SS creation time - mandatory

    For example, the following pattern %Y_recording%T.ts will generate the following file name 2017_recording15:32:35.ts.

    Max recorded file duration [hours]

    Specify the maximum time allotted for recording a video stream. Default: 2 hours

    URL

    Specify the URL of the S3 bucket.

    Ignore TLS certificate errors

    TLS certificate for S3 bucket might be detected as faulty if bucket name contains dot[s]. When this option is selected, Zixi Broadcaster will ignore the TLS certificate errors and transmit the stream to its destination.

    Access Key

    The access key that is used for accessing the S3 bucket.

    Secret Key

    The secret key that is used for accessing the S3 bucket.