Adding a Push to Broadcaster Output

To Add Push to Broadcaster Output:

In the Zixi Feeder Inputs page, click the Actions button for the incoming stream for which you want to configure an output.
In the drop-down menu, click New Output.
The New Output window with the settings of the selected input stream is displayed. You can modify any of these settings.
Enter the unique Name that you want to configure on the Feeder.
Select Push to Broadcaster as the Type of output.
Select the Input name from the drop-down list.
Note: The drop-down list consists of all those previously configured inputs on the Feeder.
Select the Program from the drop-down list.
Select the Filter for the output from the drop-down list.
If your deployment includes a DNS Load Balancer, it is possible to group multiple outputs into a single Output Group. All the outputs created in Zixi Feeder within the same group and with the same host name, will be resolved into the same IP address. You can create a new output group or use and existing output group. See Output Groups.
Enter the Properties (see Output Parameters Table below for additional parameters).
If desired, enter the Advanced Properties (see Output Parameters Table below for additional parameters).
If desired, enter the Remote RTMP Output (see Output Parameters Table below for additional parameters).
Click OK.
The New Output with its new settings takes effect.

Output Parameters Table

Parameter	Description
Name	Specify the unique name of the stream.
Type	Specify the output type. Select Push to Broadcaster.
Input
Input Name	Select the Input which has been previously configured as Input in the Feeder.
Program	If you have created a filter, you can select the relevant program.
Filter	If you have created a filter, you can select the relevant filter
Properties
Group	If your deployment includes a DNS Load Balancer, it is possible to group multiple outputs into a single Output Group. See Output Groups for more details.
Stream ID	Specify the unique Stream ID that the Broadcaster expects. Must be identical to the one configured on the Broadcaster.
Password	Optional. Specifies a password string that can be used to authenticate that the Feeder is allowed to push this stream to the configured Zixi Broadcaster. Only a Feeder who has the Password and the Stream ID of the input stream that was configured on the Broadcaster can stream into it.
Max bitrate [kbps]	Specify the maximum bitrate of the stream. Default: 8000. Note: Will be used for internal memory allocation and will not affect the transmitted bitrate. Recommended: double the bitrate of the stream.
Max Latency [ms]	Specify the maximum number of milliseconds for which the Zixi Broadcaster should buffer the stream. Default: 6000
Ignore TLS certificate	Select this option when streaming to a trusted server that does not have a valid certificate. When this option is selected, Zixi Feeder will ignore the TLS certificate errors and transmit the stream to its destination.
Host	The destination host for the push stream. Note: additional failover destinations can be added by clicking the adjacent “+” button.
Port	Specify the destination port (to listen on for Push streams). Default: 2088.
IP	Specify the local IP address. The default enables Any IP address.
Bond Links	Select this checkbox to split the stream into multiple links, which will be forwarded to a single Zixi Broadcaster.
Max Bitrate (for Bond Links enabled)	Relevant for Bond Links option. Specify the max bitrate in Kbps for the specific link.
Backup (for Bond Links enabled)	Relevant for Bond Links option. Select this checkbox to define the link as a backup. The backup will be used only if the accumulated bandwidth of the non-backup links is not sufficient.
*Advanced Properties*
PCR Smoothing delay (ms)	Enables transmission of the output at the correct rate. Required when the receiving device is sensitive and can’t lock on to the stream (in such a case, the recommended latency is 100 - 1000 ms).
Encryption Type	Specify the type of Encryption. Options are: None (default), AES 128, AES 192, AES 256 or Automatic. Selection of Automatic will generate the encryption and exchange it securely between the applications automatically.
DSCP	Specify the DSCP decimal value. This setting is relevant for networks that support Differentiated Services, a mechanism for classifying and managing network traffic and providing quality of service (QoS) on modern IP networks.
ECN	Zixi Feeder supports Explicit Congestion Notification. To enable ECN, select one of the following options that represent codepoint encoding: ECT0 - ECN Capable Transport (10) ECT1 - ECN Capable Transport (01) ECN allows end-to-end notification of network congestion without dropping packets. If the underlying network infrastructure supports ECN, this optional feature may be used between two ECN-enabled endpoints to allow notifications of network congestions without dropping packets. Conventionally, TCP/IP networks signal congestion by dropping packets. When ECN is successfully negotiated, an ECN-aware router may set a mark in the IP header instead of dropping a packet in order to signal impending congestion. The receiver of the packet echoes the congestion indication to the sender, which reduces its transmission rate as if it detected a dropped packet.
RTMP input feedback	For RTMP streams only. Select this checkbox to adjust the Zixi Feeder reading speed of the RTMP input according to the network connection speed (between the Zixi Feeder and Zixi Broadcaster). This can be useful if the RTMP source (encoder) can adjust its bitrate.
Encoder feedback script	Select this checkbox to receive reports back to the encoder about the current available bitrate according to Zixi’s network condition analysis. Supporting encoders will adjust their output bitrate accordingly. Note: for supporting encoders only. This option requires installation of a special script. For more information, see Configuring Encoder Feedback Script.
Minimum bitrate [kbps]	If Encoder feedback script option is enabled, specify the minimal bitrate for the stream. This will be the lowest bitrate, which can be recommended by the Zixi Feeder to the encoder.
Encoder address	If Encoder feedback script option is enabled, specify the IP address of the source encoder.
*Remote RTMP Output*	Note: Allow automatic RTMP option must be enabled on the Broadcaster.
URL	Specify the Stream URL of the remote RTMP server.
Backup URL	Specify a backup URL (similar to the primary URL) in case the primary RTMP server is faulty, then the Broadcaster will switch and stream to the backup one.
Stream	Specify the unique name for the stream that the RTMP server expects at the other end of the connection.
Username	Specify the User name to authenticate on the remote RTMP server.
Password	Specify the string that is used for authorization on the remote RTMP server.
Hot Backup	Click this checkbox to set the Broadcaster to output to the two RTMP servers (Primary & Backup) in parallel.