This enables pulling a Zixi transport stream from a Zixi Broadcaster. The output stream is configured automatically in the Zixi Broadcaster.
Stream names are case sensitive and must be identical.
To Add a Pull Stream:
- In the Zixi Receiver Inputs page, click the + New Input button in the Menu bar.
The Stream details screen is displayed.
- Select Pull as the Input stream.
- Enter the Stream Parameters (see Input Stream Parameters Table below).
This must be identical (case sensitive) to the stream name configured in the Zixi Broadcaster.
- Click OK.
The “Input added” message appears on the top of the screen. The Pull Stream is added to the Zixi Receiver and is now displayed in the list of Input streams available. - Ensure that Pull is selected for the Input stream (default).
- Enter the unique Input Name (an internal name) for the Receiver.
Receiver Input Stream Table
Parameter | Description |
|---|---|
Input Name | Specify the unique Input Name (an internal name) for the Receiver. |
Host | Specify the source address of the stream. |
+ Alt. Host | If you would like to add a backup Host, click '+' next to the Host field. In the Alt. Host field specify a backup URL (similar to the primary URL). In case the primary host is faulty, Zixi Receiver will switch and pull the stream from the alternative host. |
Port | Specify the connection port of the host. Default: 2077. |
Stream | Specify the input stream name as it is defined in the Zixi Broadcaster. |
Password | Specify the password for the purpose of authorization. |
Latency [ms] | Latency creates a buffer for improved performance. Higher latency may be required when the network experiences high packet loss percentage and high jitter. Default: 8000. |
Local Interface | Specify the local IP address that will be used for the connection with the Zixi Broadcaster. Or select Any to enable connecting through any available IP address. |
Min. Bitrate [kbps] | Specify the minimum bitrate for the connected input stream. |
Ignore TLS certificate | Click this checkbox to Ignore TLS certificate errors for this stream. |
Decryption type | Specify the type of encryption. |
Decryption key | Decryption key for the end-user to decipher the received encoded stream. |