Page Comparison

The Details section shows the following information:

Info
In addition to the parameters described below there are several parameters that are specific to each Target type that are displayed for a Target of that particular type.

Parameter	Description
Type	The type of Target. Possible types are: Push, Pull, RTMP, S3, HTTP or UDP/RTP.
SRT
Name	The name of the Target.
Tags	The Tag/s that is associated with this Target. You can edit the tag/s as follows: click the icon. Then, delete the current tag by clicking the "X" next to the tag. Add a new tag/s by selecting one or more tags from the drop-down list.
Events Configuration Profile	The Events Configuration Profile that was assigned to this Target. Events Profiles consist of a series of rules that determine precisely how various types of Events are logged and what results they trigger.
Location	The Target’s location is used to represent it in the proper position in the Map display. By default, the location is determined automatically based on the Target’s IP. Enter identifying info for the location (e.g. street address, zip code, coordinates) and select the desired location from the suggestions that are shown.
Network
Channel	Select from the drop-down list the Channel that will be sent to the Target.
Port	Enter the Target port on the receiving device.
Latency	Enter the latency in milliseconds.
Password	Enter a password for accessing the stream. (Optional field).
Encryption	If you would like to encrypt the stream, select one of the encryption methods. Options are: Disabled (default), AES 128, AES 192 or AES 256.
RIST
Name	The name of the Target.
Tags	The Tag/s that is associated with this Target. You can edit the tag/s as follows: click the icon. Then, delete the current tag by clicking the "X" next to the tag. Add a new tag/s by selecting one or more tags from the drop-down list.
Events Configuration Profile	The Events Configuration Profile that was assigned to this Target. Events Profiles consist of a series of rules that determine precisely how various types of Events are logged and what results they trigger.
Channel	Select from the drop-down list the Channel that will be sent to the Target.
Target
Local NIC CIDR	Enter the CIDR that represents the IP range where the desired NIC is accessed.
SMPTE 2022 FEC	Select the desired error correction method. Options are: Disabled (default), 1D or 2D.
RTMP
Name	The name of the Target.
Tags	The Tag/s that is associated with this Target. You can edit the tag/s as follows: click the icon. Then, delete the current tag by clicking the "X" next to the tag. Add a new tag/s by selecting one or more tags from the drop-down list.
Events Configuration Profile	The Events Configuration Profile that was assigned to this Target. Events Profiles consist of a series of rules that determine precisely how various types of Events are logged and what results they trigger.
Azure
Name	The name of the Target.
Tags	The Tag/s that is associated with this Target. You can edit the tag/s as follows: click the icon. Then, delete the current tag by clicking the "X" next to the tag. Add a new tag/s by selecting one or more tags from the drop-down list.
Events Configuration Profile	The Events Configuration Profile that was assigned to this Channel. Events Profiles consist of a series of rules that determine precisely how various types of Events are logged and what results they trigger.
Location	The Target’s location is used to represent it in the proper position in the Map display. By default, the location is determined automatically based on the Target’s IP. Enter identifying info for the location (e.g. street address, zip code, coordinates) and select the desired location from the suggestions that are shown.
Network
Channel	Select from the drop-down list the Channel that will be sent to the Target.
Encapsulation	Select the type of encapsulation used. Options are: HLS or CMAF (DASH + fMP4 HLS).
Ingest URL	Enter the Ingest URL of the Azure storage service to which the Channel will be pushed.
Play HLS
Upload DVR playlist
Propagate Tags to S3/MediaStore objects	Select this checkbox if you want ZEN Master to create AWS backend tags for the Tags, which were assigned to this HLS target, and propagate them to S3 and/or MediaStore objects. These tags will be applied to the manifest, the chunks, and folders.
Delete Outdated	Select Yes or No, if you would like ZEN Master to delete any outdated fragments from the server.
Ignore Certificate	Select this checkbox if you are sending the stream to a trusted server which does not have a valid certificate. When this option is selected, the Zixi Broadcaster will ignore TLS certificate errors and send the stream to its destination.
AWS Media
Name	The name of the Target.
Tags	The Tag/s that is associated with this Target. You can edit the tag/s as follows: click the icon. Then, delete the current tag by clicking the "X" next to the tag. Add a new tag/s by selecting one or more tags from the drop-down list.
Events Configuration Profile	The Events Configuration Profile that was assigned to this Target. Events Profiles consist of a series of rules that determine precisely how various types of Events are logged and what results they trigger.
Location	Network	Channel	Existing Sources – uses existing sources Transcoding – transcodes the streamThe Target’s location is used to represent it in the proper position in the Map display. By default, the location is determined automatically based on the Target’s IP. Enter identifying info for the location (e.g. street address, zip code, coordinates) and select the desired location from the suggestions that are shown.
Network
Channel	Select from the drop-down list the Channel that will be sent to the Target.
Target Host
Stream ID
Password
Latency	Enter the latency in milliseconds.
Ignore DTLS Certificate	Ignore DTLS Certificate If you are using DTLS on the server side but don’t have access to the certificate, then select this checkbox. NOTE: Even when this option is selected, the stream is still transmitted in the encrypted format, you are only losing the ability to verify the identity of the source.
HTTP
Name	The name of the Target.
Tags	The Tag/s that is associated with this Target. You can edit the tag/s as follows: click the icon. Then, delete the current tag by clicking the "X" next to the tag. Add a new tag/s by selecting one or more tags from the drop-down list.
Events Configuration Profile	The Events Configuration Profile that was assigned to this Target. Events Profiles consist of a series of rules that determine precisely how various types of Events are logged and what results they trigger.
Location	The Target’s location is used to represent it in the proper position in the Map display. By default, the location is determined automatically based on the Target’s IP. Enter identifying info for the location (e.g. street address, zip code, coordinates) and select the desired location from the suggestions that are shown.
Network
Active Broadcaster
Channel	Select from the drop-down list the Channel that will be sent to the Target.
Encapsulation	Select the type of encapsulation used. Options are: HLS or CMAF (DASH + fMP4 HLS).
Ingest URL	Enter the Ingest URL of the HTTP server to which the channel will be pushed.
Playback URL	Enter an alternative URL for playback and HLS validation. NOTE: For an S3 bucket Target this field is optional, if no URL is entered then ZEN Master will use the URL of the S3 bucket for playback and validation. For an HTTP server Target ZEN Master will not validate the stream or enable playback unless a URL is entered in this field.
Play	Play the Target content (for configurations that support this feature).
Upload DVR playlist
Propagate Tags to S3/MediaStore objects	Select this checkbox if you want ZEN Master to create AWS backend tags for the Tags, which were assigned to this HLS target, and propagate them to S3 and/or MediaStore objects. These tags will be applied to the manifest, the chunks, and folders.
Delete Outdated
Ignore Certificate	Select this checkbox if you are sending the stream to a trusted server which does not have a valid certificate. When this option is selected, the Zixi Broadcaster will ignore TLS certificate errors and send the stream to its destination.
MediaLive HTTP
Name	The name of the Target.
Tags	The Tag/s that is associated with this Target. You can edit the tag/s as follows: click the icon. Then, delete the current tag by clicking the "X" next to the tag. Add a new tag/s by selecting one or more tags from the drop-down list.
Events Configuration Profile	The Events Configuration Profile that was assigned to this Target. Events Profiles consist of a series of rules that determine precisely how various types of Events are logged and what results they trigger.
Pull
Name	The name of the Target.
Tags	The Tag/s that is associated with this Target. You can edit the tag/s as follows: click the icon. Then, delete the current tag by clicking the "X" next to the tag. Add a new tag/s by selecting one or more tags from the drop-down list.
Events Configuration Profile	The Events Configuration Profile that was assigned to this Target. Events Profiles consist of a series of rules that determine precisely how various types of Events are logged and what results they trigger.
Location	The Target’s location is used to represent it in the proper position in the Map display. By default, the location is determined automatically based on the Target’s IP. Enter identifying info for the location (e.g. street address, zip code, coordinates) and select the desired location from the suggestions that are shown.
Network
Channel	Select from the drop-down list the Channel that will be sent to the Target.
Receiver Name/ID
Latency(ms)	Enter the latency in milliseconds.
Push
Name	The name of the Target.
Tags	The Tag/s that is associated with this Target. You can edit the tag/s as follows: click the icon. Then, delete the current tag by clicking the "X" next to the tag. Add a new tag/s by selecting one or more tags from the drop-down list.
Events Configuration Profile	The Events Configuration Profile that was assigned to this Target. Events Profiles consist of a series of rules that determine precisely how various types of Events are logged and what results they trigger.
Location	The Target’s location is used to represent it in the proper position in the Map display. By default, the location is determined automatically based on the Target’s IP. Enter identifying info for the location (e.g. street address, zip code, coordinates) and select the desired location from the suggestions that are shown.
Network
Active Broadcaster
Channel	Select from the drop-down list the Channel that will be sent to the Target.
Target Host
Stream ID
Password
Latency	Enter the latency in milliseconds.
Ignore DTLS Certificate	Ignore DTLS Certificate If you are using DTLS on the server side but don’t have access to the certificate, then select this checkbox. NOTE: Even when this option is selected, the stream is still transmitted in the encrypted format, you are only losing the ability to verify the identity of the source.
Build
Application
Device
UDP/RTP
Name	The name of the Target.
Tags	The Tag/s that is associated with this Target. You can edit the tag/s as follows: click the icon. Then, delete the current tag by clicking the "X" next to the tag. Add a new tag/s by selecting one or more tags from the drop-down list.
Events Configuration Profile	The Events Configuration Profile that was assigned to this Target. Events Profiles consist of a series of rules that determine precisely how various types of Events are logged and what results they trigger.
Channel	Select from the drop-down list the Channel that will be sent to the Target.
Target
Active Broadcaster
S3
Name	The name of the Target.
Tags	The Tag/s that is associated with this Target. You can edit the tag/s as follows: click the icon. Then, delete the current tag by clicking the "X" next to the tag. Add a new tag/s by selecting one or more tags from the drop-down list.
Events Configuration Profile	The Events Configuration Profile that was assigned to this Target. Events Profiles consist of a series of rules that determine precisely how various types of Events are logged and what results they trigger.
Location	The Target’s location is used to represent it in the proper position in the Map display. By default, the location is determined automatically based on the Target’s IP. Enter identifying info for the location (e.g. street address, zip code, coordinates) and select the desired location from the suggestions that are shown.
Network
Channel	Select from the drop-down list the Channel that will be sent to the Target.
S3 URI	Enter the URI of the S3 bucket.
Encapsulation	Select the type of encapsulation used. Options are: HLS or CMAF (DASH + fMP4 HLS).
Region	The cloud service region.
Access Key ID	Enter the Access Key ID used to access your AWS account.
Playback URL	Enter an alternative URL for playback and HLS validation. NOTE: For an S3 bucket Target this field is optional, if no URL is entered then ZEN Master will use the URL of the S3 bucket for playback and validation. For an HTTP server Target ZEN Master will not validate the stream or enable playback unless a URL is entered in this field.
Play	Play the Target content (for configurations that support this feature).
Upload DVR playlist
Propagate Tags to S3/MediaStore objects	Select this checkbox if you want ZEN Master to create AWS backend tags for the Tags, which were assigned to this HLS target, and propagate them to S3 and/or MediaStore objects. These tags will be applied to the manifest, the chunks, and folders.
Delete Outdated	Select this checkbox if you would like ZEN Master to delete any outdated fragments from the server. (Default: selected)
Ignore Certificate	Select this checkbox if you are sending the stream to a trusted server which does not have a valid certificate. When this option is selected, the Zixi Broadcaster will ignore TLS certificate errors and send the stream to its destination.

Child pages (Children Display)

Child pages (Children Display)

first	2

Versions Compared

Old Version 8

New Version Current

Key