The SNMP screen includes basic configuration parameters for the configuration of Simple Network Management Protocol, which enables monitoring and control of Zixi Broadcaster by a monitoring system. For further information on how to enable and configure SNMP on Zixi Broadcaster, see ?? Configuring SNMP section.
| Field | Description |
|---|---|
| SNMP | |
Service | Click the button to Start/Stop the net- SNMP service. |
Read-only Community Name | Used in SNMPv1 and SNMPv2, this parameter is used to specify the Community Name credentials to enable read-only access to the Zixi Broadcaster monitored information. If the community string is correct, Zixi Broadcaster will responds respond with the requested information. If the community string is incorrect, Zixi Broadcaster will simply ignores the request and will not respond. |
Read-write Community Name | Used in SNMPv1 and SNMPv2, this parameter is used to specify the Community Name credentials to enable read-write access to Zixi Broadcaster. Read-write objects include, for example, zbiActive, which indicates and/or sets the Active state of an Input stream. |
SNMP V3 Users | For SNMPv3 monitoring systems, click the + button to add authentication credential credentials and fill-in the following fields:
|
Trap Receivers | Specify SNMP Trap receivers that will listen to the SNMP Traps that will be sent by Zixi Broadcaster. Click the + button to add authentication credential and fillcredentials of the Trap Receiver, by filling-in the following fields:
|