Instead of manually creating an ouput and then connecting the output to an input, you can define output templates with rules for automatic creation of outputs with predefined settings. The template includes an Input pattern. When an input pattern matches the pattern of an incoming input stream, the output is created automatically.
...
- Click the Outputs tab at the top of the Zixi Broadcaster administrative screen.
- In the Menu bar, click the Templates (
) button.
The Output Templates window is displayed:
- Under Input ID Parameters, click New +.
The New Output Pattern Template window is displayed:
- In the Input Pattern field, enter a pattern for the Stream ID of the input stream for which an output will be automatically created. This pattern will be used to identify the input stream and can include variables that are marked with the "$" sign followed by a number (e.g. $1, $2, etc.) and/or with an asterisk "*" wildcard . The patterns should also include a part of the string that requires an exact match. For example, the pattern "$1_stream_$2kbps" will match an input stream "talk_show_stream_600kbps".
- Click Apply.
The newly created input ID pattern is added to the Input ID Patterns list. - From the Input ID Patterns list, select a pattern for which you want to relate an output template.
- In the Output Template Description section click the “+” button.
The New Output Template window is displayed:
- In the Output Name field, enter a name for the output that will be created. The name can include variables used in the Input Pattern field.
- Select the desired output type and fill-in the relevant Output parameters according to the instructions of the relevant section:
- UDP Output – Follow the instructions in the Adding UDP Outputs Outputssection.
- RTMP Output – Follow the instruction in the Adding RTMP and RTMPS Outputs section.
Pull Output - Follow the instruction in the Adding Pull Outputs section.
Push Output - Follow the instruction in the Adding HTTP Push Outputs section:
UDP Output Parameters Host
Specifies the destination address of this output.
Port
Specifies the port to listen on.
TTL
Specifies the time-to-live (TTL). Used mainly to limit the range (or “scope”) of a multicast transmission. Leaving it as blank uses the default value specified by the operating system.
Smoothing [mms]
Enables transmission of the output at the correct rate. Required when the receiving device is sensitive and can’t lock on to the stream (in such a case, the recommended latency is 100 - 1000 ms).
RTP
Enables the Real-time Transport Protocol
SMPTE 2022 FEC:
Disables the FEC or specifies the type of FEC matrix to D1/ D2
Local Interface
Specifies the local IP address to use, or any one which can be sourced from any active NIC.
Local Port
Specify the local port from which to source the stream, if desired (instead of randomly chosen by the operating system).
Don’t Fragment
Select this option if you do not want to fragment IP packets in a stream.
Decryption type
Specifies the type of Encryption.
Remuxing
Enables remuxing to CBR (used for professional IRDs).
Remux to bitrate [kbps]:
Specifies the CBR bitrate to target for a remuxed stream.
RTMP Output Parameters URL
Specifies the Stream URL of the remote RTMP server.
Backup URL
Enter a backup URL (fallback mode) – will be used in case the primary server is not responsive.
Stream Name
Specifies the unique name for the stream that the RTMP server at the other end of the connection expects.
User Name
Specifies the User name to authenticate on the remote RTMP server
Password
Specifies the string that is used for authorization on the remote RTMP server.
Bitrate (kbps)
Specifies the actual bitrate or the maximum stream bitrate in case of a VBR stream.
Reconnect (sec)
If the stream drops, this value represents the time between reconnection attempts (in seconds)Default: 5.
Send Timecode
Converts the MPEG-TS SEI section to RTMP ONFI command (pass the encoder timecodes to the RTMP server)
Decryption type
Specifies the type of key used to decipher the encrypted output stream.
Pull Output Parameters Stream ID
Specify the unique Stream ID that the remote receiver expects (recommended – identical to ‘Input Stream’).
Remote ID
Specifies the Receiver ID that allowed to pull that stream.
Password
Specifies a string that can be used to authenticate that the Zixi Receiver is authorized to pull this stream (Optional).
Latency [ms]
Specify the buffer size that Zixi Broadcaster is keeping for error correction.
For example, 6000 milliseconds would ensure that the stream is protected for six seconds of errors in the network.
Default: Remote configuration.
Remote configuration – use the latency configured in the Receiver. Otherwise use a value to override the value configured in the Receiver.
Push Output Parameters Stream ID
Specify the unique Stream ID that the remote Zixi Broadcaster expects.
Host
The destination host for the push stream.
Note that additional failover destinations can be added by clicking the adjacent “+” button.
Port
Specify the ports to listen on for Push streams.
Default: 2088.Password
Optional - Specifies a string to be used at the receiving Zixi Broadcaster to authenticate that the pushing Broadcaster is allowed to push this stream.
Max Latency [ms]
Specify the buffer size that Zixi Broadcaster is keeping for error correction. For example, 6000 milliseconds would ensure that the stream is protected for six seconds of errors in the network.
Default:6000
...
.
Click OK.
The template is added to the Output Template Description list. When an input pattern will match the pattern of an incoming input stream, the defined output is created automatically.