Instead of manually selecting input streams to be transcoded, you can define templates with rules for automatic transcoding of input streams according to the settings of a pre-defined Transcoding Template. Every time a new input stream, which matches the conditions of the template, is added, it will be automatically transcoded into the transcoded streams defined in the template's settings. The input streams are identified by system according to naming patterns.
...
Parameter | Description | ||
|---|---|---|---|
Video Profile | Select an existing profile or select Keep original stream if you do not wish to transcode the video stream. | ||
Audio Profile | Select an existing profile or select Keep original stream if you do not wish to transcode the audio stream. | ||
| Apply audio profile for all audio PIDs | Select this option if you want to re-encode all audio tracks using the same audio profile, instead of just the first audio track that is detected. | ||
| Output Type | Select one of the following output types. The outputs are configured as part of the transcoding process, so there is no need to create the Output from the Zixi Broadcaster Outputs screen:
| ||
Transport Stream Bitrate (Kbps) | Specify the bitrate of the transport stream. This parameter is optional. If you do not specify a TS Bitrate, the stream will be VBR. If you specify a bitrate, the stream will be CBR. | Use Intel hardware acceleration (if available) | Select this checkbox to use hardware acceleration component if it has been installed. |
| Add RTP headers | Select this option to add RTP header to the MPEG-TS packets' Iframe . | ||
Pass all PIDs | Select this checkbox to pass-through all non-transcoded PIDs. | ||
| Force I-Frames on SCTE-35 markers - | Selecting this option will do the following:
| ||
Pass all PIDs | Select this checkbox to pass-through all non-transcoded PIDs. | ||
| Force I-Frames on SCTE-35 markers | Copy Closed Captions | Copy Closed Captions | If the video source contains closed caption, select this option to copy the CC to the encoded video streams, otherwise it will be dropped. This option is relevant for HEVC and h264 sources and targets. |
| Smoothing buffer [ms] | The Smoothing feature uses a buffer to time packets according to the stream's clock. This is useful when there are bursts in the rate in which the stream arrives. The smoothing features creates a queue in the buffer, allowing smoother entry into the Broadcaster. The Smoothing parameter defines the size of the buffer in Milliseconds. A larger the buffer enables smoother entry. However, it may influence the latency rate. | ||
| GPU | The GPU utilization threshold. If this limit is exceeded, the GPU indicator at the top of the screen will appear in red, and an alarm will be generated in the event log. Default: 0 | ||
| Crop Parameters | Select this checkbox to set the cropping parameters. | ||
| Cropping Mode | Set the units used for defining the crop. Options are: Pixels or Percentages. Note: Depending on the type of content, in some cases using different crop values for low resolution outputs might be appropriate. For example, if the content includes both video content and textual content, the text would not be readable at lower resolutions and thus might be better to exclude. Another use case for using different crop values for each output would be to slice a 360 or VR input video. | ||
| Left, Top | Specify the left and top positions for the crop. | ||
| Width x Height | Specify the width and height values for the crop. | ||
| Billing Codes | Billing codes are used to identify and differentiate traffic on a Zixi Broadcaster for billing purposes. When a billing code is added to a Source or Target, Zixi can track the traffic on that Broadcaster input or output separately from other inputs and outputs on the same Broadcaster. Billing codes are created by Zixi personnel on the Zixi Customer Portal for a particular organization. | ||
| Billing Code | Enter the billing code that corresponds to this stream. The relevant billing can be obtained from the organization that received the billing code from Zixi. | ||
| Billing password | Enter the password that corresponds to this billing code. | ||
Enable time shift | Select to enable delayed transmission. | ||
Maximum delay [hh:mm:ss] | Specify the time of the delayed transmission of this stream. Maximum: 24 hours.Transmit as multicast | ||
Enable multicast output on pull outputs | Selecting this checkbox enables the transmission of this stream’s outputs as multicast. A Zixi receiver that will pull the stream will receive it in multicast. By default Zixi Broadcaster is configured to allow transparent fallback to unicast if it is out of the LAN. Requires enabling Multicast Pull in the Settings. This setting requires enabling Multicast Pool (Settings > Multicast Pool). | ||
| Enable multicast output on pull outputsMulticast Only | Selecting this checkbox will force the transmission of this stream only in multicast. | ||
Recording Parameters | Select this checkbox to customize the recording parameters. | ||
Destination Type | Select the radio button for the desired storage type and then fill in the relevant parameters. · Record to disk – the recording is saved on the local disk. · Record to S3 – the file is saved to your AWS S3 Bucket. | ||
Record to Disk Parameters | |||
File Name Template | Specify the file name pattern that Zixi will use to generate when saving the recorded content. A separate file will be generated for each recording up to the time specified in the Max recorded file duration parameter (see above). After this duration a new file will be generated. The file name pattern can include any string and up to five variables listed below. Only the %T=HH.MM.SS creation time is mandatory. You can change the order of these variables and add text as long as you maintain the legitimate structure of the file in Linux and Windows: · %S=stream id - optional. · %Y=year - optional · %M=month - optional · %D=day - optional · %T=HH.MM.SS creation time - mandatory For example, the following pattern %Y_recording%T.ts will generate the following file name 2017_recording15:32:35.ts. | ||
Max recorded file duration [hours] | Specify the maximum time allotted for recording a video stream. Default: 2 hours | ||
Keep recorded files for [hours] | Specify the maximum time for storing the recording. Default: 0 hours | ||
Custom Path | Optionally specify a storage location for the recorded files that is relative to the root folder. This location bypasses the location specified as the root folder in the Settings > General screen. | ||
Record to S3 Parameters | |||
File Name Template | Specify the file name pattern that Zixi will use to generate when saving the recorded content. A separate file will be generated for each recording up to the time specified in the Max recorded file duration parameter (see above). After this duration a new file will be generated. The file name pattern can include any string and up to five variables listed below. Only the %T=HH.MM.SS creation time is mandatory. You can change the order of these variables and add text as long as you maintain the legitimate structure of the file in Linux and Windows:
For example, the following pattern %Y_recording%T.ts will generate the following file name 2017_recording15:32:35.ts. | ||
Max recorded file duration [hours] | Specify the maximum time allotted for recording a video stream. Default: 2 hours | ||
URL | Specify the URL of the S3 bucket. | ||
Ignore TLS certificate errors | TLS certificate for S3 bucket might be detected as faulty if bucket name contains dot[s]. When this option is selected, Zixi Broadcaster will ignore the TLS certificate errors and transmit the stream to its destination. | ||
Access Key | The access key that is used for accessing the S3 bucket. | ||
Secret Key | The secret key that is used for accessing the S3 bucket. |