...
Parameter | Description | |
|---|---|---|
| Advanced Options | ||
Video Profile | Select an existing profile or select Keep original stream if you do not wish to transcode the video stream. | |
Audio Profile | Select an existing profile or select Keep original stream if you do not wish to transcode the audio stream. | |
Transport Stream Bitrate (Kbps) | Specifies the bitrate of the transport stream. This parameter is optional. If you do not specify a TS Bitrate, the stream will be VBR. If you specify a bitrate, the stream will be CBR. | |
| Use Hardware Acceleration (if available) | Select this checkbox to use an existing hardware acceleration component if it has been installed. | |
Pass all PIDs | Select this checkbox to pass-through all non-transcoded PIDs. | |
| Enable time shift | ||
| Maximum delay [hh:mm:ss] | Specify the time of the delayed transmission of this stream. Maximum: 24 hours. | |
| Transmit as multicast | Selecting this checkbox enables the transmission of this stream’s outputs as multicast. A Zixi receiver that will pull the stream will receive it in multicast. By default Zixi Broadcaster is configured to allow transparent fallback to unicast if it is out of the LAN. Requires enabling Multicast Pull in the Settings. This setting requires enabling Multicast Pool (Settings > Multicast Pool). | |
| Multicast Only | Selecting this checkbox will force the transmission of this stream only in multicast. | |
| Recording Parameters | ||
| Max recorded file duration [hours] | Specifies the maximum time allotted for recording a video stream. Default: 2 hours | |
| Keep recorded files for [hours] | Specifies the maximum time for storing the recording. Default: 0 hours |
...