Versions Compared

Old Version 2

changes.mady.by.user alon.men@zixi.com

Saved on

compared with

New Version Current

changes.mady.by.user alon.men@zixi.com

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

The RIST output can be push streams or have them pulled to/from a RIST-enabled device. RIST seeks to provide reliable, high performance media transport by using UDP at the transport layer to avoid the inefficiencies of TCP, then layering on top Forward Error Correction and Retransmits to add the reliability inherently absent from UDP.

...

Enter the password that corresponds to this billing code
ParameterDescription
Output Parameters
Profile

Select one of the following RIST profiles that matches the input stream:

  • Simple Profile (default)
  • Main Profile
Type (Main Profile)

Select the stream direction:

  • Push
  • Pull
HostSpecify the destination IP address or URL of the host to which the steam will be pushed.
PortSpecify the target UDP port.

TTL

Specify the time-to-live (TTL). Used mainly to limit the range (or “scope”) of a multicast transmission. Leaving it as blank uses the default value specified by the operating system.

SSRC

Smoothing [mms]

Enables transmission of the output at the correct rate. Required when the receiving device is sensitive and can’t lock on to the stream (in such a case, the recommended latency is 100 - 1000 ms).

SMPTE-2022 FEC

In the SMPTE-2022 FEC standard, 1-D and 2-D parity codes are systematic FEC codes of decent complexity that provide protection against bursty or random losses.

Info

This setting can be modified without interrupting an existing stream.

To enable SMPTE-2022 FEC (Forward Error Correction) select one of the following parity options from the drop-down menu:

  • 1D - SMPTE-2022 1D can fix a problem in ONE packet per row. This means that the number of rows specified should consider the packet loss rate- the shorter the row, the more error resilience can be achieved on the expense of bitrate level. However, longer rows increase the delay that the FEC will add. It is recommended to select this option when the packet loss is sporadic. The stream will occupy the source port and two ports above it (e.g. if the source port is 8988, it will occupy 8990).
  • 2D - SMPTE-2022 2D uses a table of packets, which includes rows and columns. This option is more error resilient, but it increases the delay by (row*column) packets and increases the bitrate with R+C packets per each table of R*C packets. It is recommended to select this option when packet loss is bursty. The stream will occupy four ports above (e.g. if the source port is 8988, it will occupy 8992).
Bind to IPSelect from the drop-down list the local IP address to be used for this Input, OR select Any to enable any IP to be used.

Local Port

Specify from which local port to source the stream, if desired (instead of randomly chosen by the operating system).

Billing CodesBilling codes are used to identify and differentiate traffic on a ZEC for billing purposes. When a billing code is added to a Source or Target, ZEC can track the traffic on that ZEC input or output separately from other inputs and outputs on the same ZEC. Billing codes are created by ZEC personnel on the ZEC Customer Portal for a particular organization.
Billing CodeEnter the billing code that corresponds to this stream. The relevant billing can be obtained from the organization that received the billing code from Zixi.
Billing password

.

RIST main profile parameters
Use DTLSSelect this checkbox to encrypt the stream dynamically using DTLS.
Remultiplex/PadSelect this checkbox to enable remuxing from VBR MPEG-TS to MPEG-TS CBR (used for professional IRDs) or padding with null packets.
Mode

Select one of the following:

  • Pad – adds NULL packets and adjusts the stream clock (PCR) in order to make the stream CBR.
  • Remultiplex - performs demux->mux and rebuilds the stream according to the below parameters.
Target bitrate [kbps]:Specify the CBR bitrate to target for a remuxed stream.
Buffer Size [ms]Specify the size of the buffer that will be used for the remixing. A larger buffer increases the quality, but also increases latency.
No NULL PacketsSelect this option to re-multiplex the stream to CBR but remove the NULL packets in order to maintain low bitrate.
Enable DecryptionSelect this checkbox to decrypt an encrypted stream.

Decryption type

If the stream has been encrypted, you can decrypt through the output by selecting this checkbox and specifying the type of ecryption that was used.

Select Automatic to decrypt a stream that has been encrypted using Automatic encryption.

Only if the stream has not been encrypted, select None (default).

Important Notice: if the stream has been encrypted you must decrypt it in the output.

Decryption keyIf the decryption type includes a key, enter the key to decrypt the stream during output.
Enable IFB/TalkbackSelect this checkbox to enable IFB/Talkback for one-way communication from the director or assistant director to on-air talent or a remote location. Selecting the checkbox allows the decoder with a ZEC to send audio back to the encoder with a Zixi Feeder. This offers the ability to, for example, give audio feedback to the camera operator.
PortThe port that will be used to send the audio feedback.

...