This enables you to create RTSP streams.
...
- In the ZEC Navigation menu, click the Inputs tab.
- In the Menu bar, click New Input. The Add a new input stream window is displayed.
Enter the unique Stream ID.
Info Note: this must be identical (case sensitive) to the stream name configured in the other ZECsending Zixi Broadcaster or MediaConnect.
- Select the maximum concurrent connections to this stream from the Max. Outputs drop-down list. Default: Unlimited.
- Select the Show in Matrix check box to display this stream in the Matrix (see ZEC Using the Matrix). Default: Selected.
- Select RTSP for the input stream.
- Specify the Stream Parameters (see Input Stream Parameters Table).
- If you want to Enable time shiftto specify Billing Codes to identify and differentiate traffic on a ZEC for billing purposes, select this checkbox (see Input Stream Parameters Parameter Table below).
- If you want to Transmit as multicastto Enable multicast on pull outputs, select this checkbox (see Input Stream Parameters TableParameter table).
- If you want to to Enable encryption , select this checkbox (see Input Stream Parameters Table). For more information, see ZEC Encrypting an Input Stream.
- If you want to configure the the Recording Parameters, specify them in the respective fields (see Input Stream Parameters TableParameter table).
- Click Click OK. The The “Input added” message appears on the top of the screen. The RTMP RTSP Stream is added to the ZEC and now appears in the list of streams available in the ZEC inputs UI.
...
| Parameter | Description |
|---|---|
| Stream Parameters | |
URL | Type the Stream URL from which the ZEC will access. |
Video UDP Port | Specify the UDP port to be used for streaming the video. |
| Audio UDP Port | Specify the UDP port to be used for streaming the audio. |
| Pad to bitratebitrate [kbps] | If the stream's bitrate fluctuates you can pad the stream with null packets to create a steady bitrate. This setting determines the padding level in kbps. |
| Latency [ms] | Specify the maximum latency you can tolerate for the stream in milliseconds. Recommended - the length of two frames. |
| TCP | Select this checkbox for streams that use TCP protocol. Leave unselected in case the stream uses UDP. |
| Enable time shift | Select this checkbox to record the stream content and broadcast it after a specified delay. To deploy an input stream that uses the current stream's time shift, you need to configure a "Delayed" input stream. (See Adding Delayed Streams). |
Maximum delay [hh:mm:ss] (for Time Shift enabled) | Specify the maximum time delay of this input. |
| Transmit as multicastBilling Codes | Billing codes are used to identify and differentiate traffic on a ZEC for billing purposes. When a billing code is added to a Source or Target, Zixi can track the traffic on that Broadcaster input or output separately from other inputs and outputs on the same Broadcaster. Billing codes are created by Zixi personnel on the Zixi Customer Portal for a particular organization. |
| Billing Code | Enter the billing code that corresponds to this stream. The relevant billing can be obtained from the organization that received the billing code from Zixi. |
| Billing password | Enter the password that corresponds to this billing code. |
Enable multicast on pull outputs | Select this checkbox to enable the transmission of this stream’s outputs as multicast. A ZEC that will pull the stream will receive it in multicast. By default ZEC is configured to allow transparent fallback to unicast if it is out of the LAN. Requires enabling Multicast Pull in the Settings. |
Multicast Only (for Multicast enabled) | Select the check box to force only Multicast outputs. |
Enable encryption | Select this checkbox to encrypt the Input stream. For more information, see ZEC Encrypting an Input Stream. |
Encryption type (for Encryption enabled) | Specify the type of Encryption (AES 128/192/256). |
Encryption key (for Encryption enabled) | Click Generate to generate an encryption key. The generated encryption key must be sent to the end-user to decipher the received encoded stream. |
Recording parameters | Select this checkbox to customize the recording parameters. |
Destination Type | Select the radio button for the desired storage type and then fill in the relevant parameters. · Record to disk – the recording is saved on the local disk. It is possible to record to an external destination by replacing the default storage location with a symbolic link. To learn more, see Using an External Storage section. · Record to S3 – the file is saved to your AWS S3 Bucket. |
Record to Disk Parameters | |
File Name Template | Specify the file name pattern that Zixi will use to generate when saving the recorded content. A separate file will be generated for each recording up to the time specified in the Max recorded file duration parameter (see above). After this duration a new file will be generated. The file name pattern can include any string and up to five variables listed below. Only the %T=HH.MM.SS creation time is mandatory. You can change the order of these variables and add text as long as you maintain the legitimate structure of the file in Linux and Windows:
For example, the following pattern %Y_recording%T.ts will generate the following file name 20172022_recording15:32:35.ts. |
Max recorded file duration [hours] | Specify the maximum time allotted for recording a video stream. Default: 2 hours |
Keep recorded files for [hours] | Specify the maximum time for storing the recording. Default: 0 hours |
Custom Path | Optionally specify a storage location for the recorded files that is relative to the root folder. This location bypasses the location specified as the root folder in the Settings > General screen. |
Record to S3 Parameters | |
File Name Template | Specify the file name pattern that Zixi will use to generate when saving the recorded content. A separate file will be generated for each recording up to the time specified in the Max recorded file duration parameter (see above). After this duration a new file will be generated. The file name pattern can include any string and up to five variables listed below. Only the %T=HH.MM.SS creation time is mandatory. You can change the order of these variables and add text as long as you maintain the legitimate structure of the file in Linux and Windows:
For example, the following pattern %Y_recording%T.ts will generate the following file name 20172022_recording15:32:35.ts. |
Max recorded file duration [hours] | Specify the maximum time allotted for recording a video stream. Default: 2 hours |
URL | Specify the URL of the S3 bucket. |
Ignore TLS certificate errors | TLS certificate for S3 bucket might be detected as faulty if bucket name contains dot[s]. When this option is selected, ZEC will ignore the TLS certificate errors and transmit the stream to its destination. |
Access Key | The access key that is used for accessing the S3 bucket. |
Secret Key | The secret key that is used for accessing the S3 bucket. |
...