The UDP output outputs the stream in UDP or RTP format over unicast or multicast.
To Create a UDP Output:
- On In the Outputs screen of ZiXi Zixi Feeder, click
on the upper- right end corner of the screenclick the + New Output button in the menu bar.
The New output window is displayed:
- Type in the unique identifier for this output in the Name field.
- From the Type drop-down list, select UDP Output.
- From the Input Name drop-down list, select the desired input stream.
- If you have created a filter, select the desired Program and Filter.
- Specify the Properties (see table Output Parameters Table below for additional parameters).
- If your deployment includes a DNS Load Balancer, it is possible to group multiple outputs into a single Output Group. All the outputs created in Zixi Feeder within the same group and with the same host name, will be resolved into the same IP address. You can Create a New Output Group or Use an Existing Output Groupyou would like to add this stream to an Output Group, select an existing Group from the dropdown list OR create a new group by clicking . (see Output Parameters Table below for additional details).
- In the Host field, specify the IP address of the stream destination.
- In the Port field, specify the port of the destination.
- In the NIC field, select the network card from which the stream will be transmitted.
- Click OK.
The new UDP Output with its settings is created and now appears on the Outputs screen.
Output Parameters Table
| Parameter | Description |
|---|---|
Name | Specifies Specify the unique name of the stream. |
TypeSelect | UDP OutputSpecify what kind of activity is being performed on the stream. |
| Input | |
Input Name | Choose the input name from the drop-down list, whichconsists of all the previously configured inputs on the FeederSelect the Input which has been previously configured as Input in the Feeder. |
Program | If you have created a filter, you can select the relevant program. |
Filter | If you have created a filter, you can select the relevant filter. |
| Properties | |
| Group | If your deployment includes a DNS Load Balancer, it is possible to group multiple outputs into a single Output Group. See . All the outputs created in Zixi Feeder within the same group and with the same host name, will be resolved into the same IP address. You can create a new output group or use an existing group. See Output Groups for more details. |
Host | Specifies Specify the IP address of the stream destination. |
Port | Specifies Specify the port of the stream destination. |
Smoothing | Enables transmission of the output at the correct rate. Required when the receiving device is sensitive and can’t lock on to the stream (in such a case, the recommended latency is 100 - 1000 ms). |
NIC | Specifies Specify the Network card used. |
TTL | Specifies Specify the network Time-to-Live parameter |
...