Zixi Broadcaster offers live transcoding, enabling users to create multiple bitrate streams from a single input stream.
...
- Video Decoding – MPEG2, H.264/AVC , H.265/HEVC
- Video Encoding – MPEG2, H.264/AVC , H.265/HEVC
- Audio Decoding – AAC, MPEG-1 Audio Layer I / II / III, MPEG-2 Audio Layer I / II / III
- Audio Encoding – AAC-LC, AAC-HEv1, Opus; Pass through – any audio codec (MPEG1/2 / AAC / AC-3)
...
- ParameterDescription
Advanced Options Video Profile
Select an existing profile, select Keep original stream if you do not wish to transcode the video stream, or select Remove stream if you want to remove the video track.
Audio Profile
Select an existing profile, select Keep original stream if you do not wish to transcode the audio stream, or select Remove stream if you want to remove the audio track.
Transport Stream Bitrate (Kbps)
Specify the bitrate of the transport stream. This parameter is optional. If you do not specify a TS Bitrate, the stream will be VBR. If you specify a bitrate, the stream will be CBR.
Use Hardware Acceleration (if available) Select this checkbox to use hardware acceleration component (e.g. NVIDIA or Intel) if it has been installed. Pass all PIDs
Select this checkbox to pass-through all non-transcoded PIDs.
Smoothing Buffer (ms) Specify how much of the transcoded stream (in milliseconds) to store before transmitting it back to the server in order to prevent bursts.
If the Transport stream bitrate [kbps] field is empty, the smoothing buffer is disabled.
If the Transport stream bitrate [kbps] field is NOT empty, it is recommended to enter around 200ms, which should be enough to prevent bursts.Enable time shift Maximum delay [hh:mm:ss] Specify the time of the delayed transmission of this stream. Maximum: 24 hours. Transmit as multicast Selecting this checkbox enables the transmission of this stream’s outputs as multicast. A Zixi receiver that will pull the stream will receive it in multicast. By default Zixi Broadcaster is configured to allow transparent fallback to unicast if it is out of the LAN. Requires enabling Multicast Pull in the Settings. This setting requires enabling Multicast Pool (Settings > Multicast Pool).
Multicast Only Selecting this checkbox will force the transmission of this stream only in multicast. Enable Encryption Select this checkbox to encrypt the Input stream. For more information, see Encrypting an Input Stream in Zixi Broadcaster Encryption type (for Encryption enabled) Specify the type of Encryption (AES 128/192/256). Encryption key (for encryption enabled) Click Generate to generate an encryption key. The generated encryption key must be sent to the end-user to decipher the received encoded stream. Keep recorded files for [hours] Specifies the maximum time for storing the recording. Default: 0 hoursRecording Parameters Max recorded file duration [hours] Specifies the maximum time allotted for recording a video stream. Default: 2 hours parameters Select this checkbox to customize the recording parameters. Record to disk – the recording will be saved on the local disk. File Name Template Specify the file name pattern that Zixi will use to generate when saving the recorded content. A separate file will be generated for each recording up to the time specified in the Max recorded file duration parameter (see above). After this duration a new file will be generated.
The file name pattern can include any string and up to five variables listed below. Only the %T=HH.MM.SS creation time is mandatory. You can change the order of these variables and add text as long as you maintain the legitimate structure of the file in Linux and Windows:
- %S=stream id - optional.
- %Y=year - optional
- %M=month - optional
- %D=day - optional
- %T=HH.MM.SS creation time - mandatory
For example, the following pattern %Y_recording%T.ts will generate the following file name 2017_recording15:32:35.ts.