Page Comparison

...

1. In the Zixi Feeder Inputs page, click the menu Actions  button for the incoming stream for which you want to configure an output.
2. In the drop-down menu, click New Output.
   The New Output window with the settings of the selected input stream is displayed. You can modify any of these settings.
   
3. Enter the unique Name that you want to configure on the Feeder.
4. Select Push to Broadcaster as the Type of output.
5. Select the Input name from the drop-down list.
   Note: The drop-down list consists of all those previously configured inputs on the Feeder.
6. Select the Program from the drop-down list.
7. Select the Filter for the output from the drop-down list.
8. If your deployment includes a DNS Load Balancer, it is possible to group multiple outputs into a single Output Group. All the outputs created in Zixi Feeder within the same group and with the same host name, will be resolved into the same IP address. You can create a new output group or use and existing output group. See Output Groups.  
9. Enter the Properties (see Output Parameters Table below for additional parameters).
10. If desired, enter the Advanced Properties (see Output Parameters Table below for additional parameters).
11. If desired, enter the Remote RTMP Output (see Output Parameters Table below for additional parameters).
12. Click OK.
    The New Output with its new settings takes effect.

...