Page Comparison

...

To Create a Push to Broadcaster Output:

1. On the Outputs page of ZiXi Zixi Feeder, click    on the upper- right end corner of the screen.
   The New Output window is displayed:
   Image RemovedImage Added
   
   
2. Enter the unique Name that you want to configure on the Feeder.
3. Select Push to Broadcaster as the Type of output.

4. Select the Input name from the drop-down list.  

   Info
   Note: The drop-down list consists of all those previously configured inputs on the Feeder.

   
   

5. Select the Program from the drop-down list.
6. Select the Filter for the output from the drop-down list.
7. If your deployment includes a DNS Load Balancer, it is possible to group multiple outputs into a single Output Group. All the outputs created in Zixi Feeder within the same group and with the same host name, will be resolved into the same IP address. You can Create a New Output Group or Use an Existing Output Group.  
8. Enter the Parameters (see table below for additional parameters).
9. If desired, enter the Advanced Properties (see table below for additional parameters).
10. If desired, enter the Remote RTMP Output (see table below for additional parameters).
11. Click OK. The New Output with its new settings takes effect.

...