Typically a Pull Stream is transmitted from another ZiXi Zixi Broadcaster. In this case, the stream is initiated by your ZiXi Zixi Broadcaster.
To Add a Pull Stream:
- In the ZiXi Zixi Broadcaster Navigation menu, click the Inputs tab.
- In the Menu bar, click New Input. The Add a new input stream window is displayed.
Enter the unique Stream I.D. for the Broadcaster.
Info Note this must be identical (case sensitive) to the stream name configured in the other ZiXi Zixi Broadcaster.
- Select the maximum concurrent connections to this stream from the Max. Outputs drop-down list. Default: Unlimited.
- Select the Show in Matrix check box to display this stream in the Matrix (see Using the Matrix). Default: Selected.
- Select Pull for the input stream.
- Specify the Stream Parameters (see Input Stream Parameter table).
- If you want to Enable time shift, select this checkbox (see Input Stream Parameter table). The stream will be recorded and broadcasted after the specified delay. The time shift feature is typically used to broadcast a live event across time zones (due to the time differences between locations).
- If you want to Transmit as multicast, select this checkbox (see Input Stream Parameter table).
- If you want to configure the Recording Parameters, specify them in the respective fields (seeInput Stream Parameter table).
- You can decrypt an encrypted stream as it enters the Zixi Broadcaster. To decrypt a stream, select the Decrypt Stream checkbox and fill in the parameters as describes in the Input Stream Parameter Table below. For more information, see Decrypting an Input Stream in Zixi Broadcaster.
- Click OK. The “Input added” message appears on the top of the screen. The Push Stream from the ZiXi Zixi Feeder is added to the ZiXi Zixi Broadcaster and now appears in the list of streams available in ZiXi Zixi Broadcaster inputs UI.
Input Stream Parameters table
| Parameter | Description |
|---|---|
| Stream ID | Specifies the unique identifier for this stream. |
Max Outputs | Specifies the maximum number of allowed outputs. Default: Unlimited. |
Show in Matrix | Show input in Matrix. |
| Stream Parameters | |
| Host | Enter the IP Address of the remote Broadcaster server. Note that additional (failover) destinations can be added by clicking the adjacent “+” button |
| Port | Enter the port through which the Broadcaster receives the stream from another Broadcaster server. Default: 2088 The default input port for ZiXi Broadcaster is UDP port 2088. This port must be open on any firewalls between ZiXi Broadcaster and other devices it is communicating with. |
| Stream | Enter the unique stream ID from another Broadcaster server. |
| Password (Optional) | If desired, enter the string for authentication. It must be identical to the string configured on the other ZiXi Broadcaster. |
| Latency [ms] | Specify the maximum number of milliseconds that ZiXi Zixi Broadcaster should protect the stream for. For example, 6000 milliseconds would ensure that the stream is protected for up to six seconds of delay in the network. This setting affects memory usage as higher levels of protection require more buffering. Default:6000. |
| Bind to IP | Selects a local IP address to use, or Any IP address if it can be sourced from any active NIC. |
| Enable time shift | |
| Maximum delay [hh:mm:ss] | Specify the time of a delayed transmission of this stream. Maximum: 24 hours |
| Transmit as multicast | Enables the transmission of this stream’s outputs as multicast. A ZiXi Zixi Broadcaster that will pull the stream will receive it in multicast. By default ZiXi Zixi Broadcaster is configured to allow transparent fallback to unicast if it is out of the LAN. Requires enabling Multicast Pull in the Settings. |
| Multicast-Only | If desired, specify multicast-only outputs. |
| Recording parameters | |
| Max recorded file duration [hours] | Specifies the maximum time allotted for recording a video stream. Default: 2 hours |
| Keep recorded files for [hours] | Specifies the maximum time for storing the recording. |
| Decrypt stream | Decrypts the Input stream. For more information, see Decrypting an Input Stream in Zixi Broadcaster. Please note that the stream will not be encrypted as it passes through the Zixi path. |
| Decryption type | Specifies the type of encryption that is being used in the stream. |
| Decryption key | Specifies the key for decryption. |
...