Multicast Pull Outputs is a collection of multicast IP addresses that automatically assign a multicast IP when an input is being pulled out of the Zixi Broadcaster. When the “multicast pool” setting is enabled, you do not have to define a specific multicast IP address for every push stream. Instead, you simply enable the Multicast Only parameter and Zixi Broadcaster will assign the multicast IP automatically when it pulls the stream out. When the multicast stream is connected, it will appear in the Status table at the bottom of the screen.
| Field | Description |
|---|---|
Configuration |
|
Allow | Allows multicast pool |
Multicast pool address range | Specifies the range of IP addresses (CIDR format). |
Port | Specifies the port that will be shared by all of the members of the pool. |
NIC | Specifies the network card to use for the outgoing multicast traffic. |
TTL | Specifies the Time To Live. |
...