...
- In the Zixi Broadcaster Outputs page, click
. The New Output window is displayed. - Select the HTTP Push option (radio button)
- Type in the unique identifier for this output stream in the Output Name.
- Select an Input Adaptive Group to be made available on this output from the adjacent drop-down list.
- Select the Show in Matrix check box to display this stream in the Matrix (see Using the Matrix). Default: not selected.
- Enter the Output Parameters (see Output Stream Parameters Table).
- Click OK. The new Push Output with its settings is created and now appears on the screen.
Output Stream Parameters Table
| Parameter | Description | ||
|---|---|---|---|
Output | ParametersStream IDName | Specify the unique Stream ID that the remote ZiXi Broadcaster expects. | Linksname for the stream (string). |
| Input Adaptive Group | Select the Adaptive Group from the drop-down list. | ||
| Show in Matrix | |||
Host | The destination host for the push stream. Note that additional failover destinations can be added by clicking the adjacent “+” button. | ||
Port | Specify the ports to listen on for Push streams. | ||
| IP | Specify the local IP address. | ||
| Max Bitrate | Relevant for Bond Links option. Specify the max bitrate in Kbps for the specific link. | ||
| Backup | Relevant for Bond Links option. Select this checkbox to define the link as a backup. The backup will be used only if the accumulated bandwith of the non-backup links is not sufficient. | ||
Password | Optional - Specifies a string to be used at the receiving ZiXi Broadcaster to authenticate that the pushing Broadcaster is allowed to push this stream. | ||
Max Latency [ms] | Specify the buffer size that ZiXi Broadcaster is keeping for error correction. For example, 6000 milliseconds would ensure that the stream is protected for six seconds of errors in the network. Default:6000 |
...