Output streams can be pushed to one or more Zixi Broadcasters and Zixi Receivers. You can specify multiple destinations (Broadcasters/Receivers) by adding the under them in the Links section. You can also split a single stream using multiple links and then bond them into a single stream in Zixi Broadcaster using the Bond Links feature. For each of these links, you can specify the max bitrate that can be used. In addition, some links may be specified as backups. The backup links will be used if the bandwidth across all the non-backup links are not enough for the stream (i.e. if a non-backup link is not available, it will not use the backup. Only if the accumulated bandwidth of non-backup links is not enough, then the Broadcaster will stream to a backup link).
...
| Parameter | Description |
|---|---|
| Output Parameters | |
Stream ID | Specify the unique Stream ID that the remote ZiXi Broadcaster expects. |
| Links | |
Host | The destination host for the push stream. Note that additional failover destinations can be added by clicking the adjacent “+” button. |
Port | Specify the ports to listen on for Push streams. |
| IP | Specify the local IP address. |
| Max Bitrate | Relevant for Bond Links option. Specify the max bitrate in Kbps for the specific link. |
| Backup | Relevant for Bond Links option. Select this checkbox to define the link as a backup. The backup will be used only if the accumulated bandwith of the non-backup links is not sufficient. |
Password | Optional - Specifies a string to be used at the receiving ZiXi Broadcaster to authenticate that the pushing Broadcaster is allowed to push this stream. |
Max Latency [ms] | Specify the buffer size that ZiXi Broadcaster is keeping for error correction. For example, 6000 milliseconds would ensure that the stream is protected for six seconds of errors in the network. Default:6000 |
...