This enables the Broadcaster to receive a UDP stream. The UDP stream is not protected by the Zixi protocol.
...
- UDP – plain UDP
- RTP – Real-Time Transport Protocol
- RTP + SMPTE 2022 FEC - SMPTE 2022 standard with Forward Error Correction
RIST protocol support – Zixi Broadcaster supports RIST streams from any compliant RIST device. Contact your Zixi representative to learn more about interoperability testing between Zixi Broadcaster and 3rd party devices. The RIST protocol can be enabled for any of the stream types mentioned above.
| Info |
|---|
More details about RIST can be found at www.rist.tv. |
If the stream is an MPTS stream and you want to demux it into separate SPTS input streams, create the stream, by following the instructions below, and then follow the instruction in the Demuxing an MPTS Stream section.
...
- In the Zixi Broadcaster Navigation menu, click the Inputs tab.
- In the Menu bar, click New Input. The Add a new input stream window is displayed.
Enter the unique Stream ID.
Info Note this must be identical (case sensitive) to the stream name configured in the Zixi Feeder.
- Select the maximum concurrent connections to this stream from the Max. Outputs drop-down list. Default: Unlimited.
- Select the Show in Matrix checkbox to display this stream in the Matrix (see Using the Matrix). Default: Selected.
- Select UDP for the input stream.
- Specify the Stream Parameters (see Input Streams Parameters Table).
- If you want to Enable time shift, select this checkbox (see Input Streams Parameters Table).
- If you want to Transmit as multicast, select this checkbox (see Input Streams Parameters Table).
- If you want to configure the Recording Parameters,specify them in the respective fields (see Input Streams Parameters Table).
- If you want to Enable encryption select this checkbox (see Input Streams Parameters Table).
- Click OK.
...
| Parameter | Description | ||
|---|---|---|---|
| Stream parameters | |||
| Port | Specify the port to listen on. This port must be openon all firewalls between the Zixi Broadcaster and other devices it is communicating with. | ||
Multicast IP | If multicast, type the Multicast IP address (or leave blank in the case of Unicast). | ||
SSM Source | Specify the source IP for a source-specific multicast. | ||
Type | Select the appropriate protocol type from the drop-down list. | ||
Bind to IP | Select from the drop-down list the local IP address to be used for this Input, OR select Any to enable any IP to be used. | ||
| Bind to NIC | Select from the drop-down list the NIC to be used for this Input, OR select Any to enable any NIC to be used. | ||
| Max. bitrate [kbps] | Specify the maximum expected bitrate for memory allocation. Recommended: 2X the actual bitrate, which will prevent buffer overruns (especially with VBR streams). Default: 8000. Note – Overflows will typically occur when the Max Bitrate isn’t sufficient. | RIST | Select this checkbox to receive RIST streams from any compliant RIST device. |
| Max Latency [ms] | Specify the maximum latency of the stream in milliseconds. | ||
| Remote Port | Specify the remote port in the RIST device. Default: 0 (any port) | ||
1.4 support | Compression | Fast Connect||
| Enable time shift | Select this checkbox to record the stream content and broadcast it after a specified delay. To deploy an input stream that uses the current stream's time shift, you need to configure a "Delayed" input stream. (See Adding Delayed Streams). | ||
Maximum delay [hh:mm:ss] (for Time Shift enabled) | Specify the maximum time delay of this input. | ||
Transmit as multicast | Select this checkbox to enable the transmission of this stream’s outputs as multicast. A Zixi receiver that will pull the stream will receive it in multicast. By default Zixi Broadcaster is configured to allow transparent fallback to unicast if it is out of the LAN. Requires enabling Multicast Pull in the Settings. | ||
Multicast-Only (for multicast enabled) | Selecting this checkbox will force the transmission of this stream only in multicast. | ||
Enable Encryption | Select this checkbox to encrypt the Input stream. For more information, see Encrypting an Input Stream in Zixi Broadcaster. | ||
Encryption type (for Encryption enabled) | Specify the type of Encryption (AES 128/192/256). | ||
Encryption key (for Encryption enabled) | Click Generate to generate an encryption key. The generated encryption key must be sent to the end-user to decipher the received encoded stream. | ||
Recording parameters | Select this checkbox to customize the recording parameters. | ||
Destination Type | Select the radio button for the desired storage type and then fill in the relevant parameters.
| ||
Record to Disk Parameters | |||
File Name Template | Specify the file name pattern that Zixi will use to generate when saving the recorded content. A separate file will be generated for each recording up to the time specified in the Max recorded file duration parameter (see above). After this duration a new file will be generated. The file name pattern can include any string and up to five variables listed below. Only the %T=HH.MM.SS creation time is mandatory. You can change the order of these variables and add text as long as you maintain the legitimate structure of the file in Linux and Windows:
For example, the following pattern %Y_recording%T.ts will generate the following file name 2017_recording15:32:35.ts. | ||
Max recorded file duration [hours] | Specify the maximum time allotted for recording a video stream. Default: 2 hours | ||
Keep recorded files for [hours] | Specify the maximum time for storing the recording. Default: 0 hours | ||
Custom Path | Optionally specify a storage location for the recorded files that is relative to the root folder. This location bypasses the location specified as the root folder in the Settings > General screen. | ||
Record to S3 Parameters | |||
File Name Template | Specify the file name pattern that Zixi will use to generate when saving the recorded content. A separate file will be generated for each recording up to the time specified in the Max recorded file duration parameter (see above). After this duration a new file will be generated. The file name pattern can include any string and up to five variables listed below. Only the %T=HH.MM.SS creation time is mandatory. You can change the order of these variables and add text as long as you maintain the legitimate structure of the file in Linux and Windows: · %S=stream id - optional. · %Y=year - optional · %M=month - optional · %D=day - optional · %T=HH.MM.SS creation time - mandatory For example, the following pattern %Y_recording%T.ts will generate the following file name 2017_recording15:32:35.ts. | ||
Max recorded file duration [hours] | Specify the maximum time allotted for recording a video stream. Default: 2 hours | ||
URL | Specify the URL of the S3 bucket. | ||
Ignore TLS certificate errors | TLS certificate for S3 bucket might be detected as faulty if bucket name contains dot[s]. When this option is selected, Zixi Broadcaster will ignore the TLS certificate errors and transmit the stream to its destination. | ||
Access Key | The access key that is used for accessing the S3 bucket. | ||
Secret Key | The secret key that is used for accessing the S3 bucket. | ||
...