Page Comparison

For each Zixi Feeder component that has been configured in ZEN Master, you will need to configure the connection of the Zixi Feeder (using its Zixi Feeder UI) to ZEN Master. This will enable the actual connection, using the configured SSH key.

To connect the Zixi Feeder:

1. In ZEN Master, in the main navigation, click Settings.
2. In the SSH Keys tab, click Download on the relevant SSH Key to download the key to your machine.
3. In the main navigation, click Feeders.
4. Select the relevant Zixi Feeder from the list of existing Feeders.
5. At the bottom of the screen, click the Configuration Help This tab includes your personal connection configuration settings. You will be using these settings to connect the Zixi Feeder (host, username, and remote source port), so you should write them down or keep this browser tab open while you configure the Zixi Feeder.
6. Login to the Zixi Feeder UI (it could be a locally installed Zixi Feeder, e.g. http://localhost:4200 or a remote Zixi Feeder).
7. Go to Settings > SSH Tunnels.
   Image RemovedImage Added
   
   
   
8. In the Key File field, click Upload Key and select the downloaded SSH key file.
9. In the Host field, enter the host name that appeared in the Configuration Help.
10. In the Username field, enter the username name that appeared in the Configuration Help.  
11. Click Apply.
12. In the Reverse Tunnels section (at the bottom) click Add.
    The Tunnel Details dialog opens:
    
13. In the Remote Source Port field, enter the Remote Source Port that appeared in the Configuration Help.
14. Click OK.