To Add File Output in Feeder:
- On the Inputs page of ZiXi Zixi Feeder, click the desired row of the incoming stream to which you want to add new output.
- Click
button on the right end of the selected row and click New Output. The New output window with the settings of the selected input stream is displayed. You can modify any of these settings.
- Enter the unique Name that you want to configure on the Feeder.
- Select File Output as the Type of output.
- Enter the Parameters (see table below for additional parameters).
- Enter the Input Parameters (see table below for additional parameters).
- Enter the Path for saving the outputted file.
- Click OK. The New Output with its new settings takes effect.
| Parameter | Description |
|---|---|
Name | Specifies the unique name of the stream. |
Type | Specifies the output type. |
| Input |
Input Name | Specify the unique Stream ID that the remote receiver expects. Must be identical to the one on the Broadcaster. |
Program | If you have created a filter, you can select the relevant program |
Filter | If you have created a filter, you can select the relevant filter. |
| Properties |
Path | Specifies the location in which the file will be saved. |
...