Page Comparison

Input Name

Specifies the internal name for the input stream.

NIC

Specifies the local network card (at the source) that will be uses for receiving/listening to on for the stream. Default: Any NIC.

Port

Specifies the port to listen on. This port must be openon all firewalls between the ZiXi Feeder and other devices it is communicating with.

Address

Specifies the multicast address when the input stream is transmitted over multicast.

SSM Source

Specifies the source IP for a source-specific multicast.
Note: This is the mechanism by which multicast sources can be specified, and then either rejected or accepted. In essence, this provides a very primitive firewall system for multicast networks.

Type

Select the appropriate protocol type from the drop-down list.

• RTP/UDP – the stream can be either RTP or UDP
• RTP + SMPTE 2022 FEC – the stream is an RTP stream with Forward Error Correction enabled
• UDP – the stream is a UDP stream only.