Page Comparison

...

1. In the ZiXi Broadcaster Navigation menu, click the Inputs tab.
2. In the Menu bar, click New Input. The Add a new input stream window is displayed.
   

3. Enter the unique Stream I.D. for the Broadcaster.

   Info
   Note this must be identical (case sensitive) to the stream name configured in the ZiXi Feeder.

4. Select  the maximum concurrent connections to this stream from the Max. Outputs  drop-down list. Default: Unlimited.
5. Select the Show in Matrix check box to display this stream in the Matrix (see Using the Matrix on page 45). Default: Selected.
6. Select Push for this input stream.
7. Specify the Stream Parameters (see Input Stream Parameter Table).
8. If you want to Enable time shift, select this checkbox (see Input Stream Parameter Table). The stream will be recorded and broadcasted after the specified delay. The time shift feature is typically used to broadcast a live event across time zones (due to the time differences between locations).   
9. If you want to Transmit as multicast, select this checkbox (see Input Stream Parameter Table).
10. If you want to record the stream, you can configure the Recording Parameters (see Input Stream Parameter Table).
11. You can decrypt an encrypted stream as it enters the Zixi Broadcaster. To decrypt a stream, select the Decrypt Stream checkbox and fill in the parameters as describes in thee Input Stream Parameter Table below.  
12. Click OK. The “Input added” message appears on the top of the screen. The Push Stream from the ZiXi Feeder is added to the ZiXi Broadcaster and now appears in the list of input streams available in the  ZiXi Broadcaster input UI.

...