...
- In the Zixi Receiver, click the Inputs tab.
- Click New Input button. The Stream details screen is displayed.
Enter the unique Input Name (an internal name) for the Receiver.
Info This must be identical (case sensitive) to the stream name configured in the Zixi Broadcaster.
- Select Pull as the Input stream.
- Enter the StreamParameters (see table below for additional parameterssee Receiver Input Stream Table).
- Click OK. The “Input added” message appears on the top of the screen.
The Pull Stream is added to the Zixi Receiver and is now appears displayed in the list of Input streams available.
Receiver Input Stream
...
Table
| Parameter | Description |
|---|---|
Input Name | Specifies the unique Input Name (an internal name) for the Receiver. |
Host | Specifies the source address of the stream. |
Backup Host | Specifies a backup URL (similar to the primary URL). In case the primary host is faulty, Zixi Receiver will switch and pull the stream from the backup host. |
Port | Specifies the connection port of the host. Default: 2077. |
Stream | Specifies the input stream name as it is defined in the Zixi Broadcaster. |
Password | Specifies password for the purpose of authorization. |
Latency [ms] | Latency creates a buffer for improved performance. Higher latency may be required when the network experiences high packet loss percentage and high jitter. |
Local Interface | Specifies the local IP address that will be used for the connection with the Zixi Broadcaster. |
Min. Bitrate [kbps] | Displays the minimum bitrate for the connected input stream. |
Decryption type | Specifies the type of encryption. |
Decryption key | Decryption key for the end-user to decipher the received encoded stream. |
...