...
| Parameter | Description |
|---|---|
| Stream ID | Specifies the unique identifier for this stream. |
Max Outputs | Specifies the maximum number of allowed outputs. Default: Unlimited. |
Show in Matrix | Show input in Matrix. |
| Stream Parameters | |
| Password (Optional) | If desired, enter a password string to use for authentication (must be identical to the string configured on the Feeder) |
| Latency [ms] | Specify the maximal latency that will override the latency that was defined on the Feeder (in ms). Default: Remote configuration (i.e. use the latency was set on the feeder). (See Latency Considerations) |
| Point to point only | Selecting this checkbox transmits the stream directly (point-to-point) from the Feeder to the Receiver, while only delivering messaging to the Broadcaster. In case there is a problem with the P2P connection, it will re-route the transmission through the ZiXi Broadcaster. |
| Disable P2P Fallback | Selecting this checkbox will allow only P2P (disabling the option to re-route traffic though the ZiXi Broadcaster) |
| ID of high priority source | Setting the ID of the source that will be granted a higher priority during connection. A feeder with this ID will disconnect other existing sources. |
| Enable time shift | |
| Maximum delay [hh:mm:ss] | Specify the time of the delayed transmission of this stream. Maximum: 24 hours. |
| Transmit as multicast | Selecting this checkbox enables the transmission of this stream’s outputs as multicast. A ZiXi receiver that will pull the stream will receive it in multicast. By default ZiXi Broadcaster is configured to allow transparent fallback to unicast if it is out of the LAN. |
| Multicast Only | Selecting this checkbox will force the transmission of this stream only in multicast. |
| Recording parameters | |
| Max recorded file duration [hours] | Specifies the maximum time allotted for recording a video stream. Default: 2 hours |
| Keep recorded files for [hours] | Specifies the maximum time for storing the recording. Default: 0 hours |
| Decrypt stream* | Automatic encryption does not require manual settingsDecrypts the Input stream. Please note that the stream will not be encrypted as it passes through the Zixi path. |
| Decryption type | Specifies the type of encryption that is being used in the stream. |
| Decryption key | Specifies the key for decryption. |