Versions Compared
compared with
Key
- This line was added.
- This line was removed.
- Formatting was changed.
The Zixi Server Appliance can be either rack mounted, or simply laid on top of a flat surface (such as a desktop).
Mounting the Zixi Appliance in a Rack
| Info | ||
|---|---|---|
| ||
Make sure that the rack is electrically grounded. |
To mount the Server Appliance in a standard (19-inch) rack:
- Insert the server appliance box into an available 1U slot in the rack.
- Secure the unit to the rack by fastening the rack-mount ears to the rack frame, using the appropriate screws for rack mounting (not supplied).
- Plug in the AC power supply cable (supplied) to the power supply port in the rear panel, then plug the cable to the AC power supply (mains).
Installing the Zixi Appliance on a Desktop
| Info | ||
|---|---|---|
| ||
Make sure that the tabletop is flat and dry. |
To install the Zixi Appliance on a desktop:
- Place the appliance box on a dry, flat, leveled surface (such as a desktop).
- If the appliance is placed within a stack of other electrical appliance, make sure there is ample space behind the cooling fan (located in the back panel), to allow proper ventilation and cooling.
- Plug in the AC power supply cable (supplied) to the power supply port in the rear panel, then plug the cable to the AC power supply (mains)
Connecting the Appliance
To connect the Zixi Appliance:
- On the left side of the back panel, plug in the AC power supply cable (supplied) to the power supply, then plug the cable to the AC power supply (mains). Make sure that the power cable does not obstruct the cooling fan intake.
- In the middle of the back panel, plug in the RJ-45 Network Management Ethernet cable to the IMPI Management port (see Figure below).
| Panel | |
|---|---|
On this page:
|
Related pages
| Filter by label (Content by label) | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|